Mitsubishi Outlander GS45X. Manual — part 206
ETACS
TSB Revision
CHASSIS ELECTRICAL
54A-821
ON-VEHICLE SERVICE
CUSTOMIZATION FUNCTION
M1545002501378
Using the ETACS system of scan tool MB991958,
the following functions can be programmed. The pro-
grammed information is held even when the battery
is disconnected.
Adjustment
item (scan tool
MB991958
display)
Adjustment item
Adjusting contents
(scan tool MB991958
display)
Adjusting contents
ACC power
auto cut
Time to ACC power
cut-off when the
ignition switch is in
the ACC position
Disable
No function
30 min
30 minutes (initial condition)
60 min
60 minutes
Turn power
source
Adjustment of
turn-signal light
operation condition
ACC or IG1
Operable with ACC or ON position
IG1
Operable with ON position (initial
condition)
Comfort flasher With/without
comfort flasher
function
Disable
Without function
Enable
With function (initial condition)
Comfort flasher
switch time
Switch operation
time to activate the
comfort flasher
function
Normal
0.4 second (initial condition)
Long
0.8 second
Hazard answer
back
Adjustment of the
number of keyless
hazard warning light
answer back
flashes
Lock:1, Unlock:2
LOCK: Flashes once, UNLOCK: Flashes
twice (initial condition)
Lock:1, Unlock:0
LOCK: Flashes once, UNLOCK: No flash
Lock:0, Unlock:2
LOCK: No flash, UNLOCK: Flash twice
Lock:2, Unlock:1
LOCK: Flash twice, UNLOCK: Flash once
Lock:2, Unlock:0
LOCK: Flash twice, UNLOCK: No flash
Lock:0, Unlock:1
LOCK: No flash, UNLOCK: Flash once
Lock:0, Unlock:0
Without function
ETACS
TSB Revision
CHASSIS ELECTRICAL
54A-822
Front wiper
operation
Adjustment of the
intermittent
windshield wiper
operation <vehicles
without auto light>
Normal INT
Intermittent wiper interval is fixed to 4
seconds.
Variable INT
Intermittent wiper interval is calculated only
by the wiper volume control.
Speed Sensitive
Intermittent wiper interval is calculated
according to the intermittent wiper volume
control and vehicle speed (initial
condition).
Adjustment of the
intermittent
windshield wiper
operation <vehicles
with auto light>
Normal INT
Intermittent wiper interval is fixed to 4
seconds.
Variable INT
Intermittent wiper interval is calculated only
by the wiper volume control.
Speed Sensitive
Intermittent wiper interval is calculated
according to the intermittent wiper volume
control and vehicle speed.
Rain Sensitive
Intermittent wiper interval is calculated
according to the intermittent wiper volume
control and lighting control sensor (initial
condition).
Front wiper
washer
Disabling or
enabling
washer-linked wiper
function
Only Washer
No function
Washer & Wiper
With function: Without delayed finishing
wipe function (Initial condition)
With after wipe
With function: With delayed finishing wipe
function
Intelligent
washer
With/without
intelligent washer
function
Disable
No function
Enable
With function (initial condition)
Intermittent time
of rear wiper
Adjustment of rear
wiper interval
0 sec
No wiper interval
4 sec
4 seconds
8 sec
8 seconds (initial condition)
16 sec
16 seconds
Rear wiper low
speed mode
Disabling or
enabling rear wiper
continuous
operation
Disabled
Without function
Enabled
With function (initial condition)
Rear wiper
(linked
activated when
in reverse
Adjustment of
automatic rear
window wiper
operation with
reverse gear
engaged
Enable(R wip.ON)
Operates only when the rear wiper switch
is ON.
Enable(R/F wip.)
Operates only when the front or rear wiper
switch is ON (initial condition).
Adjustment
item (scan tool
MB991958
display)
Adjustment item
Adjusting contents
(scan tool MB991958
display)
Adjusting contents
ETACS
TSB Revision
CHASSIS ELECTRICAL
54A-823
Sensitivity for
auto light
Lighting control
sensor sensitivity
(illumination
intensity) <vehicles
with auto light>
Level 1 bright
High-high ambient brightness
Level 2 bright
High ambient brightness
Level 3
Standard ambient brightness (initial
condition)
Level 4 dark
Low ambient brightness
Level 5 dark
Low-low ambient brightness
Dome light
delay timer with
door
Adjustment of
interior light delay
shutdown time
0 sec
0 second (no delay shutdown time)
7.5 sec
7.5 seconds
15 sec
15 seconds
30 sec
30 seconds (initial condition)
60 sec
60 seconds
120 sec
120 seconds
180 sec
180 seconds
Headlight auto
cut customize
Adjustment of
headlight automatic
shutdown function
Disable
Without function
Enable (C-spec.).
With function (initial condition)
Welcome light
Disabling or
enabling welcome
light function
Disabled
No function
Small light
Tail light illuminates. (initial condition)
Head light
Headlight illuminates.
Coming home
light
Disabling or
enabling coming
home light function
Disabled
No function
15 sec
Headlight illuminates for 15 seconds.
30sec
Headlight illuminates for 30 seconds.
(initial condition)
60 sec
Headlight illuminates for 60 seconds.
180 sec
Headlight illuminates for 180 seconds.
Interior light
auto cut timer
Adjustment of
interior light
automatic shutdown
function operation
time
Disabled
Without function
3 min
3 minutes
30 min
30 minutes (initial condition)
60 min
60 minutes
Door unlock
mode
Adjustment of
power door locks
with selective
unlocking
All doors unlock
Without function: The first operation of
keyless entry system or unlock operation
by KOS unlocks all doors.
Dr door unlock
With function: The first operation of
keyless entry system or unlock operation
by KOS unlocks the driver's door only, and
the second unlock operation within 2
seconds after that unlocks all doors. (initial
condition)
Adjustment
item (scan tool
MB991958
display)
Adjustment item
Adjusting contents
(scan tool MB991958
display)
Adjusting contents
ETACS
TSB Revision
CHASSIS ELECTRICAL
54A-824
Auto door
unlock
Adjustment of the
auto door unlock
function
Disabled
Without function (initial condition)
Always (P pos)
With function: Operates when the shift
lever or the selector lever is moved to the
P position.
Always(Lock pos)
With function: Operates when the ignition
switch is moved to the LOCK (OFF)
position.
Duration of horn
chirp
Horn sounding time
during horn answer
back
Short
0.01 second (initial condition)
Long
0.02 second
Sensitivity for
theft sensor
Sensitivity level
setting of
theft-alarm sensor
<Vehicles with
theft-alarm sensor>
Level 1
100% sensitivity of theft-alarm sensor
(initial condition)
Level 2
90% sensitivity of theft-alarm sensor
Level 3
80% sensitivity of theft-alarm sensor
Level 4
70% sensitivity of theft-alarm sensor
Horn chirp by
keyless
Horn chirp by
keyless entry
system <vehicles
without auto light>
Not sound horn
No horn answerback function
Lock any time
The horn sounds when the lock button of
keyless entry transmitter is pressed once.
W lock any time
The horn sounds when the lock button of
keyless entry transmitter is pressed twice.
(initial condition)
Horn chirp by
keyless entry
system <vehicles
with auto light>
Not sound horn
No horn answerback function
Lock any time
The horn sounds when the lock button of
keyless entry transmitter is pressed once.
Lock/auto ON
During daytime, while the lighting switch is
in the AUTO position, the horn sounds
once when the lock is pressed once.
W lock any time
The horn sounds when the lock button of
keyless entry transmitter is pressed twice.
(initial condition)
Buzzer answer
back
Adjusts the tone
alarm answer back
function.
Not sound tone alarm
Without function
At keyless
Sounds when the keyless entry system is
activated.
At F.A.S.T.
*
Sounds when KOS is activated (initial
condition).
At Both
Sounds when the keyless entry system or
KOS is activated.
Timer lock timer Timer lock period
adjustment
30 sec
30 seconds (initial condition)
60 sec
60 seconds
120 sec
120 seconds
180 sec
180 seconds
Adjustment
item (scan tool
MB991958
display)
Adjustment item
Adjusting contents
(scan tool MB991958
display)
Adjusting contents
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст