Mitsubishi Outlander GS45X. Manual — part 1351
WINDSHIELD WIPER AND WASHER
TSB Revision
EXTERIOR
51-27
When the windshield washer switch on the column
switch is turned ON while the ignition switch is in
ACC or ON position, ETACS turns the windshield
washer relay ON.
When the windshield washer switch is kept ON for
0.35 second or longer, the windshield wiper relay
(the wiper relay output time varies depending on the
conditions. For details, see the table.) is turned ON,
and the windshield wiper operates at high speed.
The windshield wiper is turned OFF with 3 seconds
delay after the windshield washer switch is turned
OFF.
Even when the windshield washer switch is turned
ON while the windshield wiper is operating intermit-
tently, the intermittent action starts again after the
linked operation is finished.
If the ignition switch is turned to ACC position while
the windshield washer switch is ON, the windshield
washer relay turns ON, but the windshield wiper
does not perform the linked operation. When the
windshield washer switch is turned OFF and then
ON, the windshield wiper starts the linked operation.
NOTE:
.
•
Using the customization function, the washer
linked windshield wiper function can be invali-
dated (Refer to
•
Using the customization function, when the
washer linked windshield wiper function is invali-
dated, only the washer operates. It is useful to
melt ice from the frozen windshield.
.
Intelligent washer function
The table below shows the switch operations of the
intelligent washer.
NOTE:
.
•
The intelligent washer function can be disabled
by the customization function.(Refer to
Wiper
switch
OFF position
INT position
AUTO position
LO, HI,
MIST
position
Washer
switch
ON
time (t)
Less
than
0.35
second
0.35
second
to less
than
0.5
second
0.5
second
or more
Less
than
0.35
second
0.35
second
to less
than
0.5
second
0.5
second
or more
Less
than
0.35
second
0.35
second
to less
than
0.5
second
0.5
second
to less
than
0.75
second
0.75
second
or more
-
Windsh
ield
wiper
operati
on time
(T)
0
second
1
second
3
second
s
1
second
1
second
3
second
s
1
second
0
second
1
second
3
second
s
3
second
s
Wiper
switch
Washer-linked wiper: Enabled
Washer-linked wiper: Disabled
Vehicle speed less
than 130km/h
Vehicle speed
130km/h or more
Vehicle speed less
than 130km/h
Vehicle speed
130km/h or more
OFF
Intermittent washer
and wiping
1-second washer and
wiping
1-second washer
1-second washer
INT
Intermittent washer
and wiping
1-second washer and
wiping
1-second washer
1-second washer
AUTO
Intermittent washer
and wiping
1-second washer and
wiping
Intermittent washer
and wiping
1-second washer and
wiping
LO
Intermittent washer
and wiping
0.5-second washer
Intermittent washer
and wiping
0.5-second washer
HI or MIST
1-second washer
1-second washer
1-second washer
1-second washer
WINDSHIELD WIPER AND WASHER
TSB Revision
EXTERIOR
51-28
•
When the windshield wiper switch is operated
while the intelligent washer function is activated,
the intelligent washer function will be suspended.
.
Intermittent washer and wiping
The intermittent washer and wiping operate as fol-
lows:
1. Turn on the windshield washer switch for less
than 0.35 second.
2. The windshield washer operates for 0.5 seconds.
3. The windshield washer operates intermittently 4
to 6 times, and the windshield wipers operate,
linked with the windshield washer operation.
4. The windshield wipers operate for 3 seconds.
NOTE:
.
•
If the windshield washer switch is turned ON for
less than 0.35 second when the windshield
washer is injecting washer fluid for 0.5 seconds
and when the windshield washer is injecting
washer fluid intermittently 4 to 6 times, the inter-
mittent washer and wiping will stop.
•
If the windshield washer switch is turned ON for
less than 0.35 second when the windshield wip-
ers are operating for 3 seconds, the windshield
washer operates intermittently 4 to 6 times again.
.
1-second washer and wiping
When the windshield washer switch is turned ON for
less than 0.35 second, the windshield washer oper-
ates for 1 second. The windshield washer operates
for 1 second, and then the windshield wipers operate
for 3 seconds.
NOTE:
.
AC802531AE
t
T
T1
ON
OFF
ON
OFF
ON
OFF
Windshield washer relay
Windshield washer switch
Windshield wiper relay
t: Less than 0.35 seconds
T: 1.0 second
T1: 3.0 second
ON
OFF
Windshield wiper auto
stop signal
AC802442 AD
t
T
T1
ON
OFF
ON
OFF
ON
OFF
Windshield washer relay
Windshield washer switch
Windshield wiper relay
t: Less than 0.35 seconds
T: 1.0 second
T1: 3.0 second
WINDSHIELD WIPER AND WASHER
TSB Revision
EXTERIOR
51-29
•
If the windshield washer switch is turned ON for
less than 0.35 second when the windshield wip-
ers are operating for 3 seconds, the windshield
washer operates for 1 second again.
.
0.5-second washer
When the windshield washer switch is turned ON for less than
0.35 second, the windshield washer operates for 0.5 second.
.
1-second washer
When the windshield washer switch is turned ON for less than
0.35 second, the windshield washer operates for 1 second.
.
AC802444 AD
t
T
ON
OFF
ON
OFF
Windshield washer
relay
Windshield washer
switch
t: Less than 0.35 seconds
T: 0.5 second
AC802443AD
t
T
ON
OFF
ON
OFF
Windshield
washer relay
Windshield
washer switch
t: Less than 0.35 seconds
T: 1.0 second
WINDSHIELD WIPER AND WASHER
TSB Revision
EXTERIOR
51-30
Rain sensitive wiper function (Optional for some models)
• Lighting control sensor (rain sensor) has been
installed in the upper part of the windshield to
sense the raindrops and windshield wiper can be
operated when the ignition switch is at ON and
wiper switch is at AUTO position.
• The lighting control sensor detects the raindrops
on the windshield surface using the optical ele-
ment, and it automatically switches the wind-
shield wiper operation, depending on the amount
of rainfall, to the intermittent or LO/HI operation.
• The lighting control sensor detects the raindrops
using the reflections of infrared rays, and
depending on the amount of rainfall, it automati-
cally adjusts the wiping speed.
• Dry windshield: All infrared rays emitted from the
emitter diode are reflected by the windshield and
directed to the receiver diode as they are.
• Wet windshield: Part of the infrared rays emitted
from the emitter diode are transmitted to outside
of the windshield through the raindrops, and the
infrared rays with reduced intensity are directed
to the receiver diode.
NOTE: Using the customization function, the rain
sensitive wiper function can be invalidated (Refer to
.
Delayed finishing wipe function <Initial condition: without function>
With the ignition switch in the ACC or ON position,
when the washer lever of the column switch is oper-
ated for 0.5 second or more, or the comfort washer
function is enabled, the washer fluid is injected and
the wiper operates. The wiper operates once again
for 6 seconds after the wiper operation is stopped to
prevent the washer fluid from running down.
NOTE: Using the customization function, the delayed
finishing wipe function can be invalidated (Refer to
AC708778AB
Windshield
Lighting control sensor (rain sensor)
Windshield
Receiver diode
Emitter diode
Raindrop
High
intensity
Receiver diode
Emitter diode
Reduced
intensity
Windshield
Optical
element
Optical
element
Dry windshield
Wet windshield
Infrared rays
Infrared rays
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст