Mitsubishi Outlander GS45X. Manual — part 1276
![](/vehicles/winoney/pleueamivene/yomawofeerel/rour.png)
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-49
STEP 1. Check the wiring harness between joint connector
(CAN2) C-04 and ETACS-ECU connector C-301 for a short
to ground. Measure the resistance at joint connector
(CAN2) C-04.
(1) Disconnect joint connector (CAN2), and measure the
resistance at the wiring harness side of joint connector
(CAN2).
(2) Measure the resistance between joint connector (CAN2)
terminal 6 and body ground.
OK: 1 k
Ω or more
(3) Measure the resistance between joint connector (CAN2)
terminal 19 and body ground.
OK: 1 k
Ω or more
Q: Do all the resistances measure 1 k
Ω or more?
YES <vehicles with ASC> : Go to Step 2.
YES <vehicles without ASC (FWD)> : Go to Step 5.
YES <vehicles without ASC (Electric controlled AWD)> :
Go to Step 3.
NO : Go to Step 11.
AC702818 BR
Harness side: C-04
Test harness
AC702818 BR
Harness side: C-04
Test harness
![](/vehicles/winoney/pleueamivene/yomawofeerel/tela.png)
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-50
STEP 2. Check the wiring harness between joint connector
(CAN2) C-04 and steering wheel sensor connector C-209
for a short to ground. Measure the resistance at joint
connector (CAN2) C-04.
CAUTION
Disconnect the negative battery terminal. For details refer
to
.
CAUTION
A digital multimeter should be used. For details refer to
CAUTION
The test wiring harness should be used. For details refer to
(1) Disconnect joint connector (CAN2), and measure the
resistance at the wiring harness side of joint connector
(CAN2).
(2) Measure the resistance between joint connector (CAN2)
terminal 4 and body ground.
OK: 1 k
Ω or more
(3) Measure the resistance between joint connector (CAN2)
terminal 15 and body ground.
OK: 1 k
Ω or more
Q: Do all the resistances measure 1 k
Ω or more?
YES <FWD> : Go to Step 5.
YES <Electric controlled AWD> : Go to Step 3.
YES <S-AWC> : Go to Step 4.
NO : Go to Step 8.
AC702818 BN
Harness side: C-04
Test
harness
AC702818 BO
Harness side: C-04
Test
harness
![](/vehicles/winoney/pleueamivene/yomawofeerel/upl.png)
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-51
STEP 3 Check the wiring harness between joint connector
(CAN2) C-04 and AWD-ECU connector C-128 for a short to
ground. Measure the resistance at joint connector (CAN2)
C-04.
(1) Disconnect joint connector (CAN2), and measure the
resistance at the wiring harness side of joint connector
(CAN2).
(2) Measure the resistance between joint connector (CAN2)
terminal 5 and body ground.
OK: 1 k
Ω or more
(3) Measure the resistance between joint connector (CAN2)
terminal 16 and body ground.
OK: 1 k
Ω or more
Q: Do all the resistances measure 1 k
Ω or more?
YES : Go to Step 5.
NO : Go to Step 9.
AC702818BP
Harness side: C-04
Test
harness
AC702818 BQ
Harness side: C-04
Test
harness
![](/vehicles/winoney/pleueamivene/yomawofeerel/xyog.png)
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-52
STEP 4 Check the wiring harness between joint connector
(CAN2) C-04 and AWC-ECU connector C-139 for a short to
ground. Measure the resistance at joint connector (CAN2)
C-04.
(1) Disconnect joint connector (CAN2), and measure the
resistance at the wiring harness side of joint connector
(CAN2).
(2) Measure the resistance between joint connector (CAN2)
terminal 5 and body ground.
OK: 1 k
Ω or more
(3) Measure the resistance between joint connector (CAN2)
terminal 16 and body ground.
OK: 1 k
Ω or more
Q: Do all the resistances measure 1 k
Ω or more?
YES : Go to Step 5.
NO : Go to Step 10.
AC702818BP
Harness side: C-04
Test
harness
AC702818 BQ
Harness side: C-04
Test
harness
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст