Mitsubishi Outlander GS45X. Manual — part 1148
DIAGNOSIS
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-171
STEP 5. Check the customize function.
Check that any one of the followings other than "Not sound
horn" is set for "Horn chirp by RKE" with a customization func-
tion.
• Lock any time
• W lock any time
Q: Is the check result normal?
YES : Go to Step 6.
NO : Set "Horn chirp by RKE" to any one other than "Not
sound horn" with a customization function (Refer to
).
STEP 6. Using scan tool MB991958, read the diagnostic
trouble code.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958. Refer to "How to connect
scan tool (M.U.T.-III)
(2) Turn the ignition switch to the "ON" position.
(3) Check whether the theft alarm related DTC is set.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the DTC set?
YES : Diagnose the theft alarm. Refer to
NO : Go to Step 7.
ZC501967
AC404789
AC701411AB
MB991824
MB991827
MB991910
Data link
connector
DIAGNOSIS
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-172
STEP 7. Using scan tool MB991958, read the diagnostic
trouble code.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958. Refer to "How to connect
scan tool (M.U.T.-III)
(2) Turn the ignition switch to the "ON" position.
(3) Check whether the KOS-ECU related DTC is set.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the DTC set?
YES : Diagnose the KOS-ECU. Refer to
.
NO : Go to Step 8.
STEP 8. Check of the troubles
Check if the keyless entry hazard answerback, doom light
answerback and horn answerback function works normally.
Q: Is the check result normal?
YES : Intermittent malfunction (Refer to GROUP 00, How to
Use Troubleshooting/Inspection Service Points - How
to Cope with Intermittent Malfunction
.)
NO : Replace ETACS-ECU.
ZC501967
AC404789
AC701411AB
MB991824
MB991827
MB991910
Data link
connector
DIAGNOSIS
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-173
Inspection Procedure 15: Outer tone alarm does not sound.
CAUTION
Before replacing the ECU, ensure that the power
supply circuit, the ground circuit and the com-
munication circuit are normal.
.
OPERATION
The outer tone alarm sounds under the following
conditions.
• When the door is locked or unlocked with the
keyless or keyless operation function
• Door lock does not operate.
• The keyless operation key is brought out of the
vehicle.
• Also, with a customization function, "Tone alarm
answerback" may be set to "Not Sound Tone
alarm."
.
PROBABLE CAUSES
• Malfunction of the antenna and outer tone alarm
assembly
• Malfunction of the KOS-ECU
• Malfunction of the connector
• Function setting error or no setting with a custom-
ization
ACA02776 AB
Outer Tone Alarm Circuit
OUTER
TONE ALARM
KOS-ECU
AC901075AF
Connectors: C-32, C-102
C-32
C-102
AC803008
AE
Connectors: F-13, F-17
F-13 (GR)
F-17
DIAGNOSIS
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-174
DIAGNOSTIC PROCEDURE
STEP 1. Using scan tool MB991958, read the diagnostic
trouble code.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958. Refer to "How to connect
scan tool (M.U.T.-III)
(2) Turn the ignition switch to the "ON" position.
(3) Check whether the KOS-ECU related DTC is set.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the DTC set?
YES : Diagnose the KOS-ECU. Refer to
.
NO : Go to Step 2.
STEP 2. Check the customize function.
Check that either of the followings other than "Not sound tone
alarm" is set for "Tone alarm answer back" with the customiza-
tion function.
• At keyless key
• At keyless
• At Both
Q: Is the check result normal?
YES : Go to Step 3.
NO : Set either of the followings other than "Not sound tone
alarm" for "Tone alarm answer back" with the
customization function (Refer to
ZC501967
AC404789
AC701411AB
MB991824
MB991827
MB991910
Data link
connector
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст