Mitsubishi Outlander GS45X. Manual — part 148
HANDS FREE MODULE
TSB Revision
CHASSIS ELECTRICAL
54A-589
1. Press "S/W Update."
2. Select "Yes." (When "No" is selected, the display returns to
the "Hands Free Module" screen.)
3. Input the 4-digit code for update. ("Enter" is displayed in
gray until the 4-digit code is input.)
4. Update starts if the 4-digit code is normal.
NOTE:
.
•
When the input code is normal, the speaker will not out-
put the sound input to the microphone unit until the dis-
play returns to the "Hands Free Module" screen.
•
When the data rewriting operation is failed, the error
screen is displayed.
Hands Free Module
VOL 25
S/W Update
Unlock
Back
Error Code
Parts No.
H/W version
S/W version
HFM Self Check
HFM MIC Check
NG
OK
XX
XX. YY. ZZZ
XXXXXXXX
AC903643
AB
Hands Free Module
VOL 25
.
Update HFM S/W to version XX.YY.ZZZ?
Yes
No
AC903646
AB
Hands Free Module
Enter the security code (1-6 / 4 Digits).
Clear
Back
1
3
2
1
6
5
4
9
8
7
0
AC903980
Enter
AB
Hands Free Module
0%
HFM Reflash in Progress.
Please don’t remove Power or USB Device.
AC903648
AB
Hands Free Module
OK
Reflash Failed. Please check to make sure the USB
device contains the software update and is connected
then cycle power. If you continue to see this message
please replace the Hands Free Module.
AC903650
AB
HANDS FREE MODULE
TSB Revision
CHASSIS ELECTRICAL
54A-590
5. The "Reboot" screen is displayed when the update is
completed successfully.
6. After the hands free module is rebooted, the "Update
successfully." screen is displayed. When "OK" is selected,
the display returns to the "Hands Free Module" screen.
.
ERROR CODE
The error code is displayed to show the internal state of the
module.
NOTE: This code shows the internal state of the hands free
module. Do not determine that the module is defective even
when an error code is displayed. Be sure to diagnose the mod-
ule before replacing it.
1. Press "Error Code."
NOTE: "Error Code" is displayed when the "HFM Self
Check" is "NG."
2. When "Back" is selected, the display returns to the "Hands
Free Module" screen.
.
Hands Free Module
HFM is rebooting ...
AC903651
AB
Hands Free Module
OK
Update successfully.
Version is XX.YY.ZZZ
AC903652
Hands Free Module
VOL 25
S/W Update
Unlock
Back
Error Code
Parts No.
H/W version
S/W version
HFM Self Check
HFM MIC Check
NG
OK
XX
XX. YY. ZZZ
XXXXXXXX
AC903643
AB
Hands Free Module
Back
0 0 1
Error Code
AC904735
HANDS FREE MODULE
TSB Revision
CHASSIS ELECTRICAL
54A-591
UNLOCK
Forcibly unlocks the 4-digit passcode that was set by the secu-
rity function.
NOTE: When the module is not locked by passcode, the
"Unlock" button is displayed in gray.
1. Press "Unlock."
NOTE: "Error Code" is displayed when the "HFM Self
Check" is "NG."
2. When "Yes" is selected, "Lock mode canceled" will be
displayed and the passcode lock will be unlocked.
NOTE: When "No" is selected, the display returns to the
"Hands Free Module" screen.
3. The display returns to the "Hands Free Module" screen after
4 seconds.
Hands Free Module
VOL 25
S/W Update
Unlock
Back
Error Code
Parts No.
H/W version
S/W version
HFM Self Check
HFM MIC Check
NG
OK
XX
XX. YY. ZZZ
XXXXXXXX
AC903643
AB
Hands Free Module
VOL 25
.
Do you want to cancel lock mode?
Yes
No
AC903653
AB
Hands Free Module
VOL 25
Lock mode canceled.
AC903654
AB
HANDS FREE MODULE
TSB Revision
CHASSIS ELECTRICAL
54A-592
TROUBLE SYMPTOM CHART
M1546001801313
NOTE: Some Bluetooth
®
devices may not be com-
patible with the hands free module
Inspection
Procedure No.
Trouble symptom
Reference
page
1
Check the hands free module power supply circuit.
2
The USB adapter data cannot be replayed.
<Vehicles with radio and CD
player>
<Vehicles with MMCS>
3
When the speech switch is pressed, the voice information is output, but the
voice recognition is not performed.
4
When the speech switch is pressed, the voice
information is not output.
<Vehicles with radio and CD
player>
<Vehicles with MMCS>
5
DIAGNOSIS MODE cannot be made an entry. <Vehicles with radio and CD
player>
6
DIAGNOSIS MODE cannot be made an entry.
Mobile Phone item is not displayed on the
INFOR screen of MMCS.
<Vehicles with MMCS>
7
Steering wheel voice control switch illumination does not come on.
8
Voice guide "Unable to obtain vehicle speed.
Please try again or contact your dealer for
service" is sent from the speaker.
<Vehicles with radio and CD
player>
<Vehicles with MMCS>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст