Mitsubishi Outlander GS45X. Manual — part 1153
ON-VEHICLE SERVICE
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-191
AC611443AD
Keyless ID
Reg.*1
OK
Keyless ID
registration
Executing
Keyless ID
registration
Completed
OK
OK
Steering lock
unit Reg.*2
OK
Steering lock
unit registration
Executing
OK
Antenna select
Antenna
communication
test Executing
NOTE:
*1 Show the menu displayed when the vehicles for WCM.
*2 Show the menu displayed when the vehicles for KOS.
*3 Available if the TPMS activate tool is used. If the TPMS
activate tool is not used, check the tire pressure sensor
data by data list.
Steering lock
unit registration
Completed
Password input
Registration
result display
Comm.
Test *2
Antenna
communication
test Completed
Password input
A
Tire Pressure
Sensor ID
Registration *1,*2
Tire Pressure
Sensor Check
*1,*2, *3
Tire Pressure
Sensor ID
Check *1,*2
ID Check
Sensor Check
Sensor Check
Executing
Confirmed
Sensor Check
Executing
Sensor Check
Completed
Sensor Check
Result Display
Sensor Check
Cancel
Confirmed
OK
OK
OK
OK
OK
Cancel
Cancel
Cancel
ID Registration
Menu
ID Registration
Menu
ID Registration
Executing
Confirmed
ID Registration
Executing
ID Registration
Completed
ID Registration
Cancel
Confirmed
ID Registration
Cancel
Completed
Select & OK
Cancel
OK
Cancel
OK
OK
Cancel
OK
ON-VEHICLE SERVICE
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-192
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
Connect the scan tool MB991958 to the 16-pin data link con-
nector as follows.
NOTE: For details on how to use the scan tool, refer to the
"M.U.T.-III User's Manual."
1. Start the scan tool MB991958 system on the personal
computer and turn the ignition switch to the "ON" position.
2. Select "F.A.S.T./IMMO/Keyless/TPMS" button from the
"System Select" screen. Then, select the applicable option
code item and push the OK button.
3. Select "Special Function" on the next screen.
4. Select the button of the operation to be performed from the
"Special Function" screen.
• "Tire Pressure Sensor ID Registration": When the TPMS
transmitter is replaced and/or the KOS-ECU is replaced.
• "Tire Pressure Sensor Check": When the tire pressure sen-
sor data is checked.
• "Tire Pressure Sensor ID Check": When the tire pressure
sensor ID is checked.
• "Key & F.A.S.T. -Key Reg.": When the keyless operation key
is lost and/or the KOS-ECU is replaced.
• "Steering lock unit Reg.": When KOS-ECU is replaced but
the steering lock assembly is not replaced.
• "Comm. Test": When the KOS antenna communication sta-
tus is checked.
• "ENG Key Code Reg.": It doesn’t use it.
• "ENG Key Code & VIN Reg.": When the engine control
module is replaced.
NOTE: For "ENG Key Code Reg, & VIN Writing" refer to
GROUP 00
−
Precautions before Service
.
5. After operation check, turn the ignition switch to the "LOCK"
(OFF) position.
ZC501967
AC404789
AC701411AB
MB991824
MB991827
MB991910
Data link
connector
System Select
Select Model Year and System
System List
Model Year
Vehicle Information
Loading Option Setup
OPC
With Option
Option Name
IMMOBI & Keyless & TPMS
VF2
VF3
IMMOBI & F.A.S.T. & TPMS
Model Name
Model Year
Model Code
Up to 2005 MY
From to 2006 MY
1
2
3
4
5
6
7
8
9
10
MPI/GDI/Diesel
F.A.S.T./IMMO/Keyless/TPMS
AT/CVT/A-MT
ABS/ASC/ASTC
SAS
Multi Select 4WD
SRS Airbag
A/C
ETACS
Meter
AC609809
OK button
AB
AC802950
AB
Option: When IMMOBI & F.A.S.T. & TPMS is selected
ON-VEHICLE SERVICE
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-193
6. Remove the scan tool MB991958.
.
"KEY & F.A.S.T. -KEY REG" METHOD
1. When "Key & F.A.S.T. -Key Registration" screen is
displayed, enter the password for the key registration and
press the OK button. Then, "Executing!" is displayed and the
key registration process starts.
NOTE:
.
•
If the wrong password is entered consecutively 5 times,
the password entry for the key registration will be dis-
abled for 16 minutes.
•
The key registration cannot be cancelled during the
operation.
2. When the key registration is completed, "Completed." is
displayed. To continue the key registration, press the OK
button according to the screen instructions. Then
"Executing!" is displayed again and the next registration
process starts. To finish the key registration and start the
keyless operation key registration, press the cancel button.
Then "Press OK button to start KOS key registration" is
displayed.
NOTE:
.
•
In order to register another key consecutively after regis-
tering the first key, the ignition switch must be turned to
the ON position with the second key within 30 seconds
after turning it to the "LOCK" (OFF) position with the first
key. [When turning the ignition switch to the "ON" posi-
tion or "LOCK" (OFF) position, be sure that the emer-
gency key is connected to the keyless operation key. Do
not use the emergency key independently.]
•
Up to four keys can be registered.
3. Press the lock switch of the keyless operation key to be
registered twice within 1 minute to allow the keyless
operation key to be registered. Complete the registration
within 1 minute and press the OK button. Then the keyless
operation key registration ends.
NOTE:
.
•
Up to 4 keyless operation keys can be registered.
•
Register keyless operation keys inside the vehicle.
•
Register the keyless operation keys with the key
released from scan tool display.
4. Push the OK button after "F.A.S.T. -key Registration was
finished." is displayed.
F.A.S.T.- key
F.A.S.T./IMMO/Keyless/TPMS
F.A.S.T.- key Registration
AC609958
AB
OK button
AC609959
AB
Cancel button
F.A.S.T.- key registration.
F.A.S.T.- key Registration
AC609960
AB
F.A.S.T.- key Registration
F.A.S.T.- key Registration
AC609961
AB
ON-VEHICLE SERVICE
TSB Revision
KEYLESS OPERATION SYSTEM (KOS)
42B-194
5. Check the number of the registered keys and keyless
operation keys.
NOTE: When the key cannot be registered using scan tool
MB991958, refer to Inspection Procedure 2 "The keyless oper-
ation key cannot be registered using scan tool
.
.
"STEERING LOCK UNIT REG." METHOD
1. Enter the password on "Steering Lock Unit Registration"
screen and press the OK button to register the KOS ID.
2. Push the OK button after "Completed." is displayed.
.
"COMM. TEST" METHOD
1. Select the antenna to be tested on "Communication Test"
screen, and press the OK button with the keyless operation
key placed within the communication operational area.
2. Push the OK button after "Communication is normal." is
displayed.
.
"TIRE PRESSURE SENSOR ID REGISTRATION"
METHOD
1. Select "4tires ID Reg. (Change tire PRS.)" and start the tire
pressure sensor ID registration.
CAUTION
Register all tire pressure sensor IDs within twenty min-
utes.
2. "4 SNSR ID Registration Do you want to start? Note Finish
ID Registration within 20 minutes." is displayed. Then, press
"OK."
NOTE: If the ID code registration is not finished within 20
minutes, all the ID codes registered in the TPMS transmitter
before will be erased. For this reason, the ID codes need to
be registered again.
F.A.S.T./IMMO/Keyless/TPMS
F.A.S.T.- key Registration
F.A.S.T.- key
AC609962
F.A.S.T./IMMO/Keyless/TPMS
AC609956
OK button
AB
F.A.S.T./IMMO/Keyless/TPMS
F.A.S.T.-key
Trunk lid antenna ( outdoor )
Rear antenna ( indoor )
AC609957
OK button
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст