Mitsubishi Outlander GS45X. Manual — part 130
MMCS
TSB Revision
CHASSIS ELECTRICAL
54A-517
STEP 32. Replace the multivision display temporarily, and
check the trouble symptom.
Replace the multivision display temporarily, and check that the
sound is output from the speaker.
Q: Is the check result normal?
YES : Replace the multivision display.
NO : Replace the speaker or tweeter of output not sound.
MMCS
TSB Revision
CHASSIS ELECTRICAL
54A-518
Inspection Procedure 3: No sound is heard from one of the speakers. <Vehicles with audio amplifier>
CAUTION
Before replacing the multivision display, or audio amplifier, ensure that the power supply circuit, the
ground circuit, and the communication circuit are normal. (Check that the voltage is 10 V or more.)
Speaker System Circuit
AUDIO AMPLIFIER
FRONT DOOR
SPEAKER (LH)
FRONT DOOR
SPEAKER (RH)
SUB WOOFER
TWEETER (LH)
TWEETER (RH)
REAR DOOR
SPEAKER (LH)
REAR DOOR
SPEAKER (RH)
MMCS
TSB Revision
CHASSIS ELECTRICAL
54A-519
AUDIO AMPLIFIER
MULTIVISION DISPLAY
AC703148 AM
Connectors: C-10, C-17, C-20, C-22, C-112,
C-113
C-20
C-22
C-113 (BR)
C-17
C-10
C-112
AC702815AL
Connectors: C-126, C-127
C-127 (BR)
C-126
AC709496
AE
Connectors: D-15, D-21
D-15 (B)
D-21
ACA02660AE
Connectors: D-36, D-126, D-127
D-36
D-127
D-126
MMCS
TSB Revision
CHASSIS ELECTRICAL
54A-520
.
COMMENTS ON TROUBLE SYMPTOM
If the sound is not heard from one of the speakers,
the speaker, multivision display, audio amplifier, com-
munication line from the multivision display to the
audio amplifier, or communication line from the audio
amplifier to the speaker may have a problem. Also,
the option coding information may be inconsistent.
.
PROBABLE CAUSES
• Malfunction of speaker
• Malfunctions of multivision display
• Malfunction of audio amplifier
• Option coding information inconsistency
• Damaged harness wires and connectors
DIAGNOSIS
Required Special Tools:
• MB991223: Harness Set
• MB992006: Extra Fine Probe
• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
• MB991824: Vehicle Communication Interface (V.C.I.)
• MB991827: M.U.T.-III USB Cable
• MB991910: M.U.T.-III Main Harness A
STEP 1. Check the ETACS-ECU coding data.
Use scan tool MB991958 to diagnose the CAN bus lines.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958. Refer to "How to connect the
Scan Tool (M.U.T.-III)
."
(2) Turn the ignition switch to "ON" position.
(3) Operate the scan tool MB991958 to read the ETACS-ECU
option coding information (Refer to GROUP 00, Coding
Table
(4) Check that the "Number of speaker" is set to "Premium."
Q: Is the check result normal?
YES : Go to Step 2.
NO : Operate scan tool MB991958 to set the option coding
"Number of speaker" to "Premium," and check the
trouble symptom.
AC703415AC
Connectors: E-02, E-04, E-10, E-14, E-17, E-24
E-02 (B)
E-14 (B)
E-17
E-24
E-10
E-04
ZC501967
AC404789
AC702802
MB991824
MB991827
MB991910
Data link
connector
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст