Mitsubishi Outlander GS45X. Manual — part 82
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-325
COLUMN SWITCH (SWITCH BODY PART)
CONTINUITY CHECK
M1543100800069
1. Remove the lighting switch and the wiper/washer switch.
2. Check that the continuity is present for the same terminal
numbers (No. 2-11) of the column switch body connectors
that remain on the steering column.
RADIO AND CD PLAYER
GENERAL INFORMATION
M1544000101382
The unique panel audio (radio and CD player, CD changer
built-in type radio and CD player) gives a sense of unity with
the instrument panel. Also, a new function automatically cor-
rects the sound quality and volume during driving.
Windshield
wiper switch
Hi
6
− 8
Continuity exists
(2
Ω or less)
Lo
6
− 9
Continuity exists
(2
Ω or less)
Auto 6
− 10
Continuity exists
(2
Ω or less)
Mist
6
− 11
Continuity exists
(2
Ω or less)
Switch position
Tester
connection
Specified
condition
Column switch
body
Tester
connection
Specified
condition
• Lighting switch
side connector
• Wiper/washer
switch side
connector
2
− 2
3
− 3
4
− 4
5
− 5
6
− 6
7
− 7
8
− 8
9
− 9
10
− 10
11
− 11
Continuity exists
(2
Ω or less)
AC502901AG
1
6
8
11
10
9
7
5
4
3
2
1
6
8
11
10
9
7
5
4
3
2
Lighting
switch side
Wiper/washer
switch side
AC606299AH
Unique panel audio
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-326
With the exception of some models, the vehicles with audio
amplifier have the external connection jack (audio
adapter).Therefore, portable music player and so on can be
connected.
NOTE:
.
•
*1
: CD-R/CD-RW may not be played.
•
*2
: Some may not be played.
AC809504
AB
Audio adopter
Rear floor console
Item
radio and CD player
CD changer built-in type
radio and CD player
Electronic tuning radio
Equipped
Equipped
SIRIUS satellite radio
−
Equipped (Only the vehicles
with the satellite radio tuner)
USB
Equipped (Only the vehicles
with the USB box or hands
free module)
Equipped (Only the vehicles
with the USB box or hands
free module)
Hands free interface system
Equipped (Only the vehicles
with the hands free module)
Equipped (Only the vehicles
with the hands free module)
CD player
*1
(compatible with MP3
*2
)
Equipped
Equipped
6-disk CD autochanger
*1
(compatible with
MP3
*2
)
−
Equipped
Audio integrated 4-ch power amplifier and
digital signal processor (DSP)
General 140 W
General 140 W
Audio amplifier-integrated 8-ch power amplifier
and digital signal processor (DSP) <Rockford
Fosgate
® premium sound system>
−
General 710 W (maximum)
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-327
SPECIAL TOOLS
M1542000602555
Tool
Tool number and
name
Supersession
Application
MB990784
Ornament remover
General service tool
Removal of center outlet, center
panel or cover.
MB991958
a. MB991824
b. MB991827
c. MB991910
d. MB991911
e. MB991914
f. MB991825
g. MB991826
M.U.T.-III sub
assembly
a. Vehicle
communication
interface (V.C.I.)
b. M.U.T.-III USB
cable
c. M.U.T.-III main
harness A
(Vehicles with
CAN
communication
system)
d. M.U.T.-III main
harness B
(Vehicles without
CAN
communication
system)
e. M.U.T.-III main
harness C (for
Chrysler models
only)
f. M.U.T.-III
measurement
adapter
g. M.U.T.-III trigger
harness
MB991824-KIT
NOTE: G: MB991826
M.U.T.-III Trigger
Harness is not
necessary when
pushing V.C.I. ENTER
key.
CAUTION
M.U.T.-III main harness A
(MB991910) should be used.
M.U.T.-III main harness B and C
should not be used for this
vehicle.
Diagnostic trouble code or service
data check.
MB990784
MB991910
MB991826
MB991958
MB991911
MB991914
MB991824
MB991827
MB991825
DO NOT USE
a
b
c
d
e
f
g
DO NOT USE
RADIO AND CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-328
DIAGNOSIS
INTRODUCTION TO AUDIO SYSTEM DIAGNOSIS
M1544004700725
RADIO AND CD PLAYER ERROR CODES
If the radio and CD player detects any malfunction in
itself or the inserted CD, the error codes below will
be shown on the display.
MB991223
a. MB991219
b. MB991220
c. MB991221
d. MB991222
Harness set
a. Test harness
b. LED harness
c. LED harness
adaptor
d. Probe
General service tools Continuity check and voltage
measurement at harness wire or
connector for loose, corroded or
damaged terminals, or terminals
pushed back in the connector.
a. Connector pin contact
pressure inspection
b. Power circuit inspection
c. Power circuit inspection
d. Commercial tester connection
MB992006
Extra fine probe
−
Continuity check and voltage
measurement at harness wire or
connector for loose, corroded or
damaged terminals, or terminals
pushed back in the connector.
Tool
Tool number and
name
Supersession
Application
MB991223
a
d
c
b
DO NOT USE
BA
MB992006
Error code
Cause
Cause of trouble and its solution
ERROR
Power supply error
This error code will be shown if there is any problem in the
power supply system of the radio and CD player. Check the
connectors and wiring harness of the power supply system, and
check that the battery voltage is normal. Check that the same
error does not appear.
ERROR 01
Focus error
These error codes will be shown if there is any problem with the
CD or there is excessive vibration on the vehicle. If the error
codes are not displayed when the vehicle is stopped and
another CD is inserted, there is a problem with the CD. Check if
there is any of the following problems with the CD.
• Contamination, scratch, or deformation
• Formation of moisture or grease
Repair the CD and insert it again. Then, check that no error
appears.
ERROR 02
Abnormal disc
ERROR 03
Mechanical error
This error codes will be shown if there is any internal
mechanical or electrical problem in the radio and CD player.
Replace the radio and CD player check that no error codes are
shown.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст