Mitsubishi Fuso Canter. Manual — part 1
1
CONTENTS
■ GENERAL INFORMATION
■ BASIC MODELS & SPECIFICATIONS
1. MODEL CODING SYSTEM
2. BODY CODING SYSTEM
3. EXTERIOR COLOR & INTERIOR CODE
4. CLASSIFICATION OF EXPORT VEHICLE SPECIFICATIONS
5. WEIGHTS DEFINITION
6. SPECIFIC GRAVITY OF GOODS
7. CONVERSION TABLE
NOTE
The information in this material is accurate as of the date of publication.
Mitsubishi Fuso Truck and Bus Corporation reserves the right to make
changes in the specification, equipment or design, or to discontinue
models or options without notice at any time.
8TG4K0E066
1. CAB & CHASSIS
FB
FB71A Series
Spec. No. FB71, 1 / 9
FE
FE71P / FE73P Series
Spec. No. FE71 / 73, 1 / 11
FE83P / FE84P Series
Spec. No. FE83 / 84, 1 / 13
FE85P Series
Spec. No. FE85P, 1 / 9
FE85C-Z Series
Spec. No. FE85C, 1 / 9
FG
FG83P Series
Spec. No. FG83, 1 / 9
2. CARGO & DUMP TRUCK
CARGO TRUCK
FB71A Series
Spec. No. FB71-C, 1 / 2
FE71P Series
Spec. No. FE71-C, 1 / 2
FE73P Series
Spec. No. FE73-C, 1 / 2
FE83P Series
Spec. No. FE83-C, 1/ 2
FE83P-W Series
Spec. No. FE83W-C, 1 / 2
FE84P Series
Spec. No. FE84-C, 1 / 2
FE85P Series
Spec. No. FE85P-C, 1 / 2
FE85C-Z Series
Spec. No. FE85C-C, 1 / 2
FG83P Series
Spec. No. FG83-C, 1 / 2
FG83P-W Series
Spec. No. FG83W-C, 1 / 2
DUMP TRUCK
FE71PBD4 Series
Spec. No. FE71-D, 1 / 2
FE83PCD6 Series
Spec. No. FE83-D, 1 / 2
2
1. MODEL CODING SYSTEM
■
GENERAL INFORMATION
3
CARGO
2. BODY CODING SYSTEM
The BODY CODE mentioned the specification sheets of MITSUBISHI FUSO truck is used for
MFTBC production arrangement, which is classified as mentioned below.
You are kindly requested to use BODY TYPE (EX: WOODEN CARGO) and BODY CODE (EX: CA)
at your order, so that we can follow your requiment adequately.
NOTE: CODE of TRUCK CHASSIS WITH CAB”
→
AA”
”
”
DUMP
BODY CODE
CA
CS
DA
DB
DC
DD
WOODEN CARGO
ALL STEEL CARGO
DROP TAIL
DROP SIDE & TAIL
DROP TAIL, U-SECTION
SCOOP END
BODY TYPE
PAINT NAME
FB, FE, FG
Cab & Chassis / Cab & Chassis with Body
W31
Natural White
Standard
B00
Sonic Blue
Option
G58
Forest Green
Option
T89
Shannon Blue
Option
INTERIOR CODE
00G
EXTERIOR
COLOR CODE
3. EXTERIOR COLOR & INTERIOR CODE
4
4. CLASSIFICATION OF EXPORT VEHICLE SPECIFICATIONS
(1) Results of a detailed analysis of past export achievements conspicuously show features
by area, such as the adoption of snorkel-type air intake in the Middle East and Africa and the
adoption of two-speed rear axle in Latin America. Equipment and accessories show a similar
tendency.
Deciding specifications by country and order looks as if it satisfies the requirements of the
owners greatly. However, besides making production and sales control of the manufacturer
and the sales agents complex and increasing the cost burden of the manufacturer, it results
in unsatisfactory supply of accessorial parts arising from confusion in specification control
(parts picked erroneously or missing parts, delay in delivery), raising fears of betraying the
owners’ reliance on the vehicles in the
long run. There have been such instances.
Export specifications have been therefore,
established as shown in Fig. 1 on the basis
of results of inspection trips made by
MITSUBISHI FUSO engineers in various
places overseas and experience acquired
through business talks conducted, field
service report and orders received so far.
Production and supply activities have
been conducted in accordance with the
classification of export specifications.
Coping with market
adaptability
Covering merchandis-
ability overseas
Coping with owners' needs
Regional
Spec.
Option
Variation
MODEL
Basic Spec.
(2) The classification of export specifications and their details are as follows.
Basic Specifications
1. Equipment standards that form the basis of
publicity material, parts catalogues, etc.,
but do not include options.
2. Equipment level that becomes the standard
for cost and price calculations.
3. Standard specifications for design
arrangements.
Details are shown in this
book.
Regional Specifications
Tentative Specifications
Options
1. Drive line combinations.
2. Equipment, accessories.
1. Specifications established beforehand by
area.
2. Specifications established beforehand by
principal destination.
1. Special specifications when orders are
received intermittently for small numbers.
2. Special specifications at time of spot deal
business.
To cope individually with
basic specifications plus
options.
To cope individually with
basic specifications plus
options.
Details are shown in this
book.
(3) The Export Vehicle Specifications in this material show the Basic Specifications and the
Regional Specifications are not described herein. The Regional Specifications are separately
established for market-by-market basic in order to comply with the respective laws, rules and
regulations such as for vehicular laws and traffic rules, to incorporate the specifications in
conformity with the service conditions, and to provide additional equipment and accessories
for meeting with the customers’ needs and market tendency. Thus, the Regional Specifications
are repeatedly revised in accordance with the needs from time to time.
(4) In the case of mounting the body on the cab & chassis, please refer to the BODY
BUILDER’S DRAWING” of the technical information for installation (which is compiled and
issued for the vehicles separately by class-by-class basis).
”
Fig.1 Export Specifications Established
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст