Mitsubishi Eclipse. Technical Information Manual (1994) — part 86
7-2
EQUIPMENT - Features
FEATURES
Improved reliability
Nrn8QoAA
1. Gold plating of electronic control system terminals
2. MWP (Multipole Water Proof type) connector
Improved visibility
and safety
1. Double action ignition switch (ignition key push type)
adopted to prevent locking the steering wheel during driving
by accidentally removing the ignition key
vehicles>
2. Large-sized combination meter adopted
3. High-mounted stop light used.
4. Multi-reflector type headlights adopted.
Improved usability and
convenience
1.
ETACS adopted for centralized control of the alarm buzzer
and timer functions
2.
Electric type speedometer whose pointer moves smoothly
without vibrations as the speed changes
Improved serviceability
1.
Data link connectors (centralized terminals for inspection)
adopted to allow inspection of the diagnostic functions
by a scan tool
2. Dedicated connectors for adjustment of ignition timing,
engine speed detection and fuel pump operation check
adopted
3.
Plug-in type combination meter easy to mount and demount
adopted
4. Wiper motor and link system removable as a unit.
The on-board diagnostic system comprises the fol-
lowing functions to assure better serviceability.
Diagnostic trouble
code (low speed
signal) output
0
Diagnostic trouble
code (high speed
signal) output
0
Service data
(high speed signal)
output
0
Actuator test
(low speed signal)
Actuator test
(high speed signal)
0
Simplified inspection
code output (Same
indication pattern as
for diagnosis code)
Diagnostic trouble
code retained in
memory
Auto-cruise
control
0
0
0
0
0
Until battery is OFF
ABS
FWD
AWD
0
0
0
0
0
0
0
EEPROM
Diagnostic trouble
code erased by
0
0
0 0
0
scan tool
Data is retained in memory until it is electrically cleared.
EQUIPMENT On-board
System
L I N K
Data link connectors (centralized terminals for in-
spection) have been adopted to allow inspection
of the diagnosis functions by the scan tool.
Al
Data link connector (12 pin)
Data link connector (12 pin)
21.
24.
25.
Eng.
26.
27. CCD Bus
CCD Bus
. -
;::
32.
Data link connector (16 pin)
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16
Data link connector
pin)
1. Diagnosis control
I
Chassis around
5. Signal
6.
7. 9141
TX*’
8. ABS (AWD)
9. ETACS (One shot pulse signal)
10.
Auto-cruise control
14. Simulated vehicles speed
15.
16. Battery power supply (+B)
NOTE
Non-turbo
Vehicles with
automatic transaxle
Engine (MFI), ABS (FWD)
EQUIPMENT Battery
The battery of the following specifications has been
established.
SPECIFICATIONS
Items
Specifications
B.C.I. Group size 86
B.C.I. Group size 86
Capacity (5HR)
Ah
50
50
Reserve capacity
min.
90
90
Cold cranking current
A
430
525
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст