Mitsubishi Eclipse. Technical Information Manual (1994) — part 79
6-4
INTERIOR - Seat
SEAT
FRONT SEAT
The front seats are designed around the body’s
center of gravity. The driver’s seat has been
equipped with various adjustment mechanisms
(7-way adjustments at maximum) to best fit the driv-
er’s physical features and riding posture. On some
models, optional power seats with three-way adjust-
N76ZD6llAA
ment mechanisms, namely, power-driven dual
height adjustment mechanisms and slide adjustment
mechanism are available. In addition, use of Freon
in urethane pad manufacturing process has been
suspended in an effort to protect the global environ-
ment.
Items
Dual height
adjustment
Front height
adjustment
Rear height
adjustment
Driver’s seat
Front passenger’s seat
Manual seat
Power seat
Manual seat
X
X
X (power)
X (power)
Slide adjustment
X
X (power)
X
Reclining adjustment
Lumbar support adjustment
X (with memory)
X (with memory)
X
X (with walk-in
mechanism)
Side support adjustment
Head restraint vertical adjustment
NOTE: indicates the item available on some models.
X
X
X
X
vertical adjustment
power
<Driver’s manual
Head restraint
Lumbar support
vertical adjustment
.
Slide adjustment
Dual height
adjustment
Slide adjustment
Slide
1 9 x 0 5 9 5
INTERIOR Seat
Power Seat Circuit
POWER SEAT SWITCH
I
FUSIBLE LINK
POWER SEAT
SLIDE
FRONT HEIGHT
REAR HEIGHT
I
SLIDE MOTOR
OFF
ON
Memory lever
FRONT HEIGHT
M O T O R
UP
REAR HEIGHT
M O T O R
ON
1
7
CONSTRUCTION AND OPERATION
RECLINING ADJUSTMENT MECHANISM WITH MEMORY
If the
is raised after being inclined to the front, it
can be returned to the original angle set in memory by previously
setting the
angle in memory.
Furthermore, even after it is reclined at any angle, if the
is raised after being inclined to the front, it can be returned
to the original angle set in memory.
The reclining memory mechanism consists of a memory lever,
memory plate, guide plate, guide lever and spring.
(1) Set the
to the position to be memorized, and
push the memory lever.
INTERIOR Seat
Memory
Guide lever
Guide
plate
Guide lever
plate
Memory range
A
(2) When the memory lever is pushed, it releases the meshing
of the memory plate and memory lever, and the memory
plate is rotated by the spring force and contacts the guide
plate.
When the memory lever is released, the lever engages
with the memory plate, completing the memorizing opera-
tion.
(3) Pull the reclining adjuster lever and fold the
for-
ward.
(4) Raise the seatback.
As the guide lever is now held by the guide plate, the
reclining gear cannot be locked.
(5) Raise the
further
Then the memory plate contacts the position A of the guide
plate and the guide plate starts to rotate.
When the memorized position is reached, the guide plate
releases the guide lever and the reclining gear is locked
to hold the
in position.
(6) The memory range is between A and in the illustration.
If the memory lever is operated at a position between
and C, position is memorized.
Worm
B
Limit
Lower rail
Cable wire
Slide Adjustment Structure
The motor, limit switch and gears are mounted on the plate
fixed to the lower rails.
When the slide adjustment switch is operated, the motor starts
and rotates worm gear A in the gear box via the cable wire.
This rotating torque is transmitted through gears A and B to
worm gear B. The worm gear B moves the upper rails and
therefore the seat mounted on the upper rails.
When the seat slides to the forward or backward limit, the
cover mounted to the upper rail pushes the limit switch and
turns the motor off. This stops the seat slide operation.
Front Height and Rear Height Adjusting Structure
The front and rear portions of the seat cushion can
be raised and lowered independently. If the front
height and rear height switch is pushed to the up
side, motor revolutions will be transferred to gear
to sector gear. Since the sector gear, shaft and arm
are fixed, the seat cushion rises continuously
less) along with the revolution of the sector gear.
Sector gear
Rear height motor
Arm
Front height motor
cushion
As the seat cushion continues to rise, the claw on
the shaft turns the limit switch from ON to OFF,
cutting off power to the motor and stopping it.
In addition, if the front height and rear height switch
is pushed to the down side, operation is reversed
with the motor revolving in the opposite direction
and lowering the seat cushion.
Seat cushion
Power seat switch
,
Limit switch
Seat
Power seat switch
Limit
Arm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст