Mitsubishi Lancer Evolution 8. Manual — part 3
ENGINE (4G6) – INTAKE AND EXHAUST EQUIPMENT
1-5
Intake and Exhaust Equipment
1. Air intake system
1-1 Intercooler
It is basically the same as the original Lancer Evolution-VII, but the air guides at the bottom of the intercooler assembly have
been discontinued in line with changes to the front bumper.
New
Intercooler assembly
Intercooler assembly
Old
Air guide
AC211453AB
ENGINE (4G6) – INTAKE AND EXHAUST EQUIPMENT
1-6
1-2 Intercooler water spray
It is basically the same as the original Lancer Evolution-VII, but the water spray hose has been changed in line with changes
to the front bumper.
Water spray hose
assembly
Washer tank
Intercooler assembly
Intercooler assembly
Washer tank
Water spray hose
assembly
New
Old
ENGINE (4G6) – FUEL SYSTEM
1-7
Fuel System
The fuel system is basically the same as that in the original Lancer Evolution-VII, but the following changes have been made:
• The fuel tank assembly has been changed and the tank capacity has been increased in order to extend the range.
• A steel plate fuel delivery pipe has been adopted, fuel pulsation has been reduced as have engine vibration and noise.
Specifications
Delivery pipe
Delivery pipe
Construction Diagram
Old
Fuel tank assembly
Fuel tank assembly
New
Items
New
Old
Fuel tank capacity L
GSR
RS
55
50
48
48
ENGINE (4G6) – FUEL SYSTEM
1-8
1. Fuel tank
The shape of the fuel tank has been changed. In order to extend the range, the tank capacity of the GSR has been increased
to 55 litres, and the tank capacity of the RS has been increased to 50 litres taking into consideration the balance between
range and the RS’s weight, and motor sport requirements.
New
Gauge and
pump assembly
Fuel pump and gauge assembly
Cut-off valve assembly
Fuel tank
Old
Gauge and
pump assembly
Fuel tank
Fuel pump and gauge assembly
Cut-off valve assembly
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст