Mitsubishi Lancer Evolution IX. Manual — part 379
![](/vehicles/winoney/wruvea/ger/zout.png)
DOOR MIRROR
EXTERIOR
51-29
STEP 2. Connector check: C-214 junction block
connector
AC304913
21
7
16 15
17
18
20 19
1
2
3
4
5
6
23 22
24
25
28
26
27
9
8
10
11
14
12
13
Connector: C-214
Harness side
AC
Junction block (Front view)
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
− How to Cope with Intermittent
).
NO :
Repair the defective connector.
Inspection Procedure 2: Right or Left Heated Door Mirror does not Operate
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
REAR WINDOW
DEFOGGER RELAY
REAR WINDOW
DEFOGGER
REMOTE
CONTROLLED
MIRROR (RH)
REMOTE
CONTROLLED
MIRROR (LH)
MIRROR
HEATER
MIRROR
HEATER
NOTE
LH drive vehicles
RH drive vehicles
Heated door mirror circuit
![](/vehicles/winoney/wruvea/ger/tsu.png)
DOOR MIRROR
EXTERIOR
51-30
COMMENTS ON TROUBLE SYMPTOM
If either of the heated door mirrors does not work, the
door mirror assembly may be defective.
PROBABLE CAUSES
• Malfunction of the door mirror assembly
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
STEP 1. Verify the operation of each heated door
mirror.
Q: Which door mirror does not heat?
Door mirror (RH) :
Go to Step 2.
Door mirror (LH) :
Go to Step 9.
STEP 2. Connector check: E-10 door mirror
assembly (RH) connector
AC304817
Connector: E-10
Harness side
AC
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Repair the defective connector.
STEP 3. Check the door mirror assembly (RH).
Check that the heater element of the door mirror
assembly (RH) is in good condition (Refer to
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Replace the door mirror assembly (RH).
STEP 4. Resistance measurement at the E-10
door mirror assembly (RH) connector.
AC304817
Connector: E-10
Harness side
AC
(1) Disconnect the connector, and measure at the
wiring harness side.
AC304821
Connector E-10
(harness side)
AC
(2) Resistance between E-10 door mirror assembly
connector terminal No.4 and body earth
OK: 2
Ω or less
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Go to Step 5.
![](/vehicles/winoney/wruvea/ger/mathe.png)
DOOR MIRROR
EXTERIOR
51-31
STEP 5. Check the wiring harness between E-10
door mirror assembly (RH) connector terminal
No.4 and body earth.
AC304817
Connector: E-10
Harness side
AC
• Check the earth wires for open circuit.
NOTE:
AC304819
Connector: C-110
AC
Prior to the wiring harness inspection, check interme-
diate connector C-110 and repair if necessary.
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
− How to Cope with Intermittent
NO :
Repair the wiring harness.
STEP 6. Voltage measurement at the E-10 door
mirror assembly (RH) connector.
(1) Turn the ignition switch to the ON position.
(2) Rear window defogger switch: ON
AC304817
Connector: E-10
Harness side
AC
(3) Disconnect the connector, and measure at the
wiring harness side.
AC304826
Connector E-10
(harness side)
AC
(4) Voltage between E-10 door mirror assembly
connector terminal No.1 and body earth
OK: System voltage
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
− How to Cope with Intermittent
).
NO :
Go to Step 7.
STEP 7. Connector check: C-214 junction block
connector
AC304913
21
7
16 15
17
18
20 19
1
2
3
4
5
6
23 22
24
25
28
26
27
9
8
10
11
14
12
13
Connector: C-214
Harness side
AD
Junction block (Front view)
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the defective connector.
![](/vehicles/winoney/wruvea/ger/ngs.png)
DOOR MIRROR
EXTERIOR
51-32
STEP 8. Check the wiring harness between E-10
door mirror assembly (RH) connector terminal
No.1 and C-214 junction block connector
terminal No.3.
AC304817
Connector: E-10
Harness side
AC
AC304913
21
7
16 15
17
18
20 19
1
2
3
4
5
6
23 22
24
25
28
26
27
9
8
10
11
14
12
13
Connector: C-214
Harness side
AD
Junction block (Front view)
• Check the power supply line for open circuit.
NOTE:
AC304819
Connector: C-110
AC
Prior to the wiring harness inspection, check interme-
diate connector C-110 and repair if necessary.
Q: Is the check result normal?
YES :
Intermittent malfunction (Refer to GROUP
00
− How to Cope with Intermittent
NO :
Repair the wiring harness.
STEP 9. Connector check: E-03 door mirror
assembly (LH) connector
AC304818
Connector: E-03
Harness side
AC
Q: Is the check result normal?
YES :
Go to Step 10.
NO :
Repair the defective connector.
STEP 10. Check the door mirror assembly (LH).
Check that the heater element of the door mirror
assembly (LH) is in good condition (Refer to
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Replace the door mirror assembly (LH).
STEP 11. Resistance measurement at the E-03
door mirror assembly (LH) connector.
AC304818
Connector: E-03
Harness side
AC
(1) Disconnect the connector, and measure at the
wiring harness side.
AC310825
Connector E-03
(harness side)
AB
(2) Resistance between E-03 door mirror assembly
connector terminal No.4 and body earth
OK: 2
Ω or less
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст