Mitsubishi Lancer Evolution IX. Manual — part 485
ENGINE CONTROL RESISTOR, RELAY
MULTIPORT FUEL INJECTION (MPI)
13A-415
ENGINE CONTROL RESISTOR, RELAY
REMOVAL AND INSTALLATION
M1131034600024
Pre-removal Operation
• Strut Tower Bar Removal (Refer to GROUP 42, Strut
Tower Bar
• Harness Connector Disconnection
Post-installation Operation
• Harness Connector Connection
• Strut Tower Bar Installation (Refer to GROUP 42, Strut
Tower Bar
AC310757
1
5.0 ± 1.0 N·m
2
3
4
2.5 ± 0.5 N·m
5.0 ± 1.0 N·m
5.0 ± 1.0 N·m
AB
<L.H. drive vehicles>
<R.H. drive vehicles>
5.0 ± 1.0 N·m
5.0 ± 1.0 N·m
2
5.0 ± 1.0 N·m
3
2.5 ± 0.5 N·m
5.0 ± 1.0 N·m
4
1
Electric pump relay
Electric pump relay
Removal steps
•
Electric pump relay (Refer to
GROUP 22A, Sensor, Switch and
Relay
1.
Fuel pump relay
2.
Injector resistor
3.
Bracket
4.
Fuel pump resistor
Removal steps (Continued)
ENGINE-ECU
MULTIPORT FUEL INJECTION (MPI)
13A-416
ENGINE-ECU
REMOVAL AND INSTALLATION
M1131033800230
CAUTION
When the engine-ECU is replaced, always refer to GROUP 54A, General Information
− Immobilizer
System
− Encrypted Code Registration Criteria Table
.
Pre-removal and Post-installation Operation
• Glove Box Assembly Removal and Installation (Refer to
GROUP 52A, Instrument Panel
• Harness Cover Removal and Installation (Refer to
GROUP 52A, Instrument Panel
AC505253AB
1
5.0 ± 1.0 N·m
2
Removal steps
1.
Engine-ECU connectors
2.
Engine-ECU
13-1
GROUP 13
CONTENTS
MULTIPORT FUEL INJECTION (MPI) . . . . . . . . . . . . . . . . . . . .
FUEL SUPPLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTES
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст