Mitsubishi Lancer Evolution IX. Manual — part 166
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-227
Step 5. Connector check: D-05 front room lamp
connector, D-07 rear room lamp connector
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the defective connector.
Step 6. Check the bulbs of the front or rear room
lamps.
Check that the front or rear room lamp bulbs are not
burned out.
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Replace the front or rear room lamp bulb.
Step 7. Connector check: C-226 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the defective connector.
AC310464
Harness side
D-05
D-05
AB
Connectors: D-05, D-07
Harness side
D-07
<LHD>
D-07
(GR)
AC310472
Harness side
D-05
D-05
AB
Connectors: D-05, D-07
Harness side
D-07
<RHD>
D-07
(GR)
AC310450
Connector: C-226
AB
Junction block side
Junction block (rear view)
<LHD>
AC310461
Junction block (rear view)
Connector: C-226
AB
<RHD>
Junction block side
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-228
Step 8. Check the wiring harness from C-226
ETACS-ECU connector terminal Nos.5 and 6 to
D-05 front room lamp connector terminal Nos.2
and 1 or D-07 rear room lamp connector terminal
Nos.2 and 1.
NOTE:
Prior to the wiring harness inspection, check junction
block connector C-218, and repair if necessary.
• Check the input or output lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the wiring harness.
AC310450
Connector: C-226
AB
Junction block side
Junction block (rear view)
<LHD>
AC310461
Junction block (rear view)
Connector: C-226
AB
<RHD>
Junction block side
AC310464
Harness side
D-05
D-05
AB
Connectors: D-05, D-07
Harness side
D-07
<LHD>
D-07
(GR)
AC310472
Harness side
D-05
D-05
AB
Connectors: D-05, D-07
Harness side
D-07
<RHD>
D-07
(GR)
AC310448
Harness side
Junction block (front view)
Connector: C-218
AL
<LHD>
AC310458
Harness side
Junction block (front view)
Connector: C-218
AJ
<RHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-229
Step 9. Retest the system.
Check that the front or rear room lamp illuminates
and extinguishes normally.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the ETACS-ECU.
Step 10. Connector check: F-02 luggage
compartment lamp connector, F-09 luggage
compartment lamp switch connector
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Repair the defective connector.
AC310468
Connectors: F-02, F-09
<LHD>
Harness side
F-02
Harness side
F-09
AB
F-09 (B)
F-02
AC310470
Connectors: F-02, F-09
<RHD>
Harness side
F-02
Harness side
F-09
AB
F-02
F-09 (B)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-230
Step 11. Check the bulbs of the luggage
compartment lamp.
Check that the luggage compartment lamp bulb are
not burned out.
Q: Is the check result normal?
YES :
Go to Step 12.
NO :
Replace the luggage compartment lamp
bulb.
Step 12. Check the luggage compartment lamp
switch.
Check the luggage compartment lamp switch.Refer
to GROUP 42
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Replace the luggage compartment lamp
switch.
Step 13. Check the wiring harness from F-02
luggage compartment lamp connector terminal
No.2 to F-09 luggage compartment lamp switch
connector terminal No.1.
• Check the earth wires for open circuit.
Q: Is the check result normal?
YES :
Go to Step 14.
NO :
Repair the wiring harness.
AC310468
Connectors: F-02, F-09
<LHD>
Harness side
F-02
Harness side
F-09
AB
F-09 (B)
F-02
AC310470
Connectors: F-02, F-09
<RHD>
Harness side
F-02
Harness side
F-09
AB
F-02
F-09 (B)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст