Mitsubishi Lancer. Manual — part 44
NOTES
0
0-1
CONTENTS
P RE CAUT I O NS BE F O RE S E RV I CE
. . . . . . . . . . . . . . . . . . . . . . . . .
Doing Service Work in Groups of Two
or M or e M ec hanic s
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tubes and O t her Rubber P ar t s
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S er v ic ing t he E lec t r ic al S y s t em
. . . . . . . . . . . . . . . . .
Application of Anti-Corrosion Agents
and Under c oat s
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P r e- I ns pec t ions Condit ion
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I n O r der t o P r ev ent Vehic les f r om F ir e
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL --
Precautions before Service
0-2
PRECAUTIONS BEFORE SERVICE
PROTECTING THE VEHICLE
If there is a likelihood of damaging interior or exterior parts
during service operations, protect them with suitable covers
(such as seat covers, fender covers, etc.).
DOING SERVICE WORK IN GROUPS OF TWO
OR MORE MECHANICS
If the service work is to be done by two or more mechanics
working together, all the mechanics involved should take
safety into consideration while they work.
REMOVAL AND DISASSEMBLY
When checking a malfunction, find the cause of the problem.
If it is determined that removal and/or disassembly is
necessary, perform the work by following the procedures
contained in this manual.
If punch marks or mating marks are made to avoid error in
assembly and facilitate the assembly work, be sure to make
them in locations which will have no detrimental effect on
performance and/or appearance.
If an area having many parts, similar parts, and/or parts
which are symmetrical right and left is disassembled, be sure
to arrange the parts so that they do not become mixed
during the assembly process.
1.
Arrange the parts removed in the proper order.
2.
Determine which parts are to be reused and which are to
be replaced.
3.
If bolts, nuts, etc., are to be replaced, be sure to use
only the exact size specified.
SPECIAL TOOLS
If other tools are substituted for the special tools to do
service of repair work, there is the danger that vehicle parts
might be damaged, or the technician might be injured;
therefore, be sure to use the special tool whenever doing
any work for which the use of one is specified.
GENERAL --
Precautions before Service
0-3
PARTS TO BE REPLACED
If any of the following parts are removed, they must be
replaced with new parts.
1.
Oil seals
2.
Gaskets (except rocker cover gasket)
3.
Packings
4.
O-rings
5.
Lock washers
6.
Split pins
7.
Self-locking nuts
PARTS
When replacing parts, use MITSUBISHI genuine parts.
TUBES AND OTHER RUBBER PARTS
Be careful to avoid spilling any petrol, oil, etc., because if it
adheres to any tubes or other rubber parts, they might be
adversely affected.
LUBRICANTS
In accordance with the instructions in this Manual, apply the
specified lubricants in the specified locations during
assembly and installation.
BRAKE FLUID
Be careful to avoid spilling any brake fluid, because if it
adheres to the vehicle body, the paint coat might be
discoloured.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст