Mitsubishi Lancer. Manual — part 22
FENDER SHIELD
WELDED PANEL REPLACEMENT
3-6
AB301042
Y0189AV
E
F
I
G
H
AB
(Right side)
2 points right side only
High-rigidity foam
(LHD left side)
4 points, passenger's side only
(With the upper frame extension outer removed)
I
I
FENDER SHIELD
WELDED PANEL REPLACEMENT
3-7
NOTES
FRONT SIDEMEMBER (PARTIAL REPLACEMENT)
WELDED PANEL REPLACEMENT
3-8
FRONT SIDEMEMBER (PARTIAL REPLACEMENT)
M4030000100119
NOTE: Refer to the Headlamp Support section on
for the welding points with headlamp support.
Spot welding
MIG plug welding : indicates two panels to be welded
: indicates three panels to be welded
MIG spot welding
MIG arc welding (continuous)
Braze welding
Anti-corrosion agent application locations
(Use access holes to apply liberally to butt-welded joints.)
( )
Symbol
Operation description
AB300992AB
AB301044
A
B
D
C
Centre of
under cover
mounting hole
40 mm
Centre of front sidemember
inner positioning hole
105 mm
B
A
FRONT SIDEMEMBER (PARTIAL REPLACEMENT)
WELDED PANEL REPLACEMENT
3-9
NOTE ON REPAIR WORK
REMOVAL
<Left side>
1. Reuse the parts other than the sidemember outer
and sidemember inner.
2. As shown in the figure of the instructions, bend
the front fender shield on the cut area in advance,
when cutting the front sidemember outer.
3. Remove the battery bracket front on the cut area
in advance when cutting the front sidemember
inner.
AB301045
105 mm
45 mm
D
AB
Centre of front
sidemember inner positioning hole
Centre of under cover
mounting hole
C
AB300835AB
Cut position
Front
fender
shield
AB201857AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст