Dodge Dakota (ND). Manual — part 910
ASSEMBLY
MAINSHAFT
1. Install mainshaft center support bearing (1) on
mainshaft (2).
2. Install sixth gear bearing (1) on mainshaft (2).
21 - 32
MANUAL TRANSMISSION-GETRAG 238
ND
3. Install sixth gear (1) on mainshaft (2).
4. Install sixth gear clutch body (1) on sixth gear (2).
5. Install sixth gear friction ring (1) on clutch body (2).
ND
MANUAL TRANSMISSION-GETRAG 238
21 - 33
6. Install 5-6 synchronizer hub (1) on mainshaft with
Installer W-262 (2).
7. Install 5-6 synchronizer hub (1) snap ring (2).
21 - 34
MANUAL TRANSMISSION-GETRAG 238
ND
8. Install 5-6 synchronizer detents (1) in hub (2).
NOTE: Whenever installing a synchronizer sleeve
onto the hub, make sure that the grooves in the
sleeve are aligned with the detents in the hub.
9. Install 5-6 synchronizer sleeve (1) on hub (2).
10. Install fifth gear synchronizer friction ring (1) on
5-6 synchronizer hub (2).
ND
MANUAL TRANSMISSION-GETRAG 238
21 - 35
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст