Dodge Dakota (ND). Manual — part 324
B1A32-UNIVERSAL GARAGE DOOR SWITCH 1 STUCK
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition on.
•
Set Condition:
The Electronic Overhead Module detects an internal switch failure.
Possible Causes
ELECTRONIC OVERHEAD MODULE
Diagnostic Test
1.
REPLACE THE ELECTRONIC OVERHEAD MODULE
When this code is set, the Electronic Overhead Module must be replaced.
Repair
Replace theElectronic Overhead Module in accordance with the Service Information.
Perform the BODY VERIFICATION TEST-VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL
MODULES/FRONT CONTROL MODULE - DIAGNOSIS AND TESTING)
8M - 2
OVERHEAD CONSOLE - ELECTRICAL DIAGNOSTICS
ND
B1A33-UNIVERSAL GARAGE DOOR SWITCH 2 STUCK
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition on.
•
Set Condition:
The Electronic Overhead Module detects an internal switch failure.
Refer to B1A32-UNIVERSAL GARAGE DOOR SWITCH 1 STUCK for the diagnostic procedure.
ND
OVERHEAD CONSOLE - ELECTRICAL DIAGNOSTICS
8M - 3
B1A34-UNIVERSAL GARAGE DOOR SWITCH 3 STUCK
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition on.
•
Set Condition:
TheElectronic Overhead Module detects an internal switch failure.
Refer to B1A32-UNIVERSAL GARAGE DOOR SWITCH 1 STUCK for the diagnostic test procedure.
8M - 4
OVERHEAD CONSOLE - ELECTRICAL DIAGNOSTICS
ND
B2217 - EVIC/EOM/CMTC INTERNAL
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition on.
•
Set Condition:
The Electronic Overhead Module detects an internal failure.
Possible Causes
ELECTRONIC OVERHEAD MODULE
Diagnostic Test
1.
VERIFY OPERATION OF THE ELECTRONIC OVERHEAD MODULE
Turn the ignition on.
With the scan tool, erase Electronic Overhead Module DTCs.
With the scan tool, activate the Electronic Overhead Module self test.
With the scan tool, read Electronic Overhead Module DTCs.
Does the scan tool display DTC B2217–EVIC/EOM/CMTC INTERNAL?
YES
>> Replace the Electronic Overhead Module in accordance with the service information.
Perform the BODY VERIFICATION TEST-VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL
MODULES/FRONT CONTROL MODULE - DIAGNOSIS AND TESTING)
NO
>> Test complete.
ND
OVERHEAD CONSOLE - ELECTRICAL DIAGNOSTICS
8M - 5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст