Dodge Dakota (ND). Manual — part 913
8. With tongs place heated Plug 9625 in countershaft
bearing and heated Plug 9619-1 into mainshaft
bearing. Allow plugs to heat bearings for two
minutes.
9. Remove Plug 9625 and Plug 9619 with welding
gloves or tongs, then install front housing (1) on
mainshaft and countershaft in fixture (2).
21 - 44
MANUAL TRANSMISSION-GETRAG 238
ND
10. Apply Mopar
T
Lock & Seal Adhesive or equivalent
to shift fork pivot bolts. Install 5-6 (1) and 3-4 (2)
shift fork pivot bolts, in both sides of the front
housing and tighten to 35 N·m (26 ft. lbs.).
NOTE: Verify shift fork pivot holes are aligned with
pivot bolt holes before installing bolts.
11. Install two detents (1) in the side of the front hous-
ing (2).
ND
MANUAL TRANSMISSION-GETRAG 238
21 - 45
FINAL ASSEMBLY
1. Turn front housing (1) with fixture (2) over onto the
front housing and remove fixture.
2. Install intermediate plate (1) and two dowels (2).
21 - 46
MANUAL TRANSMISSION-GETRAG 238
ND
3. Install intermediate plate (1) bolts (2) and tighten to
22 N·m (16 ft. lbs.).
4. Install interlock plate washers (1) on support (2).
5. Install interlock plate (2) and tighten bolts (1) to 10
N·m (88 in. lbs.).
ND
MANUAL TRANSMISSION-GETRAG 238
21 - 47
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст