Dodge Dakota (ND). Manual — part 814
Connecting Rod Guides 8507
Crankshaft Damper Installer 8512
Puller 1026
Crankshaft Damper Removal Insert 8513 - A
Chain Tensioner
Chain Tensioner Pins 8514
VALVE SPRING COMPRESSOR 8426
ENGINE LIFTING FIXTURE 8427
9 - 794
ENGINE - 3.7L SERVICE INFORMATION
ND
CAMSHAFT HOLDER 8428
HOLDER SECONDARY CAMSHAFT CHAIN 8429
Remover, Rocker Arm 8516
Idler Shaft Remover 8517
Valve Spring Compressor Adapters 8519
INSTALLER COUNTER BALANCE SHAFT 8641
Valve Spring Tester C-647
ND
ENGINE - 3.7L SERVICE INFORMATION
9 - 795
Dial Indicator C-3339
Valve Spring Compressor C-3422-B
Indicator, Cylinder Bore C-119
Oil Pressure Gauge C-3292
Piston Ring Compressor C-385
Pressure Tester Kit 7700
Bloc–Chek–Kit C-3685–A
ENGINE SUPPORT FIXTURE 8534
9 - 796
ENGINE - 3.7L SERVICE INFORMATION
ND
CLEANER-AIR ELEMENT
REMOVAL
Filter Element Only
Housing removal is not necessary for element (filter)
replacement.
1. Loosen clamp (1) and disconnect air duct at air
cleaner cover (3).
2. Pry over 4 spring clips (5) from housing cover
(spring clips retain cover to housing).
3. Release housing cover (3) from locating tabs on
housing and remove cover (3).
4. Remove air cleaner element (filter) from housing.
5. Clean inside of housing before replacing element.
Housing Assembly
1. Loosen clamp and disconnect air duct at air
cleaner cover.
2. Lift entire housing assembly (1) from 4 locating
pins (2).
ND
ENGINE - 3.7L SERVICE INFORMATION
9 - 797
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст