Dodge Dakota (ND). Manual — part 968
10. Remove the 4X4 stub shaft (1) from the transmis-
sion output shaft. Inspect the cir-clip on the shaft
for damage and replace the clip if necessary.
NOTE: The speed sensor bolts have a sealing
patch applied from the factory. Separate these
bolts for reuse.
11. Remove the input speed sensor bolt.
NOTE: The speed sensor bolts have a sealing
patch applied from the factory. Separate these
bolts for reuse.
12. Remove the output speed sensor bolt.
21 - 264
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
ND
13. Remove the input and output (2) speed sensors.
Identify the speed sensors for re-installation since
they are not interchangeable.
NOTE: One of the oil pan bolts has a sealing patch
applied from the factory. Separate this bolt for
reuse.
14. Remove the transmission oil pan bolts (2).
15. Remove the transmission oil pan (1).
ND
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
21 - 265
16. Remove the transmission oil filter screws (2).
17. Remove transmission oil filter (1).
18. Remove the oil filter o-ring (2) from the valve
body.
21 - 266
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
ND
19. Remove valve body-to-case bolts (1).
CAUTION: Do not handle the valve body by the
manual shaft. Damage could result.
20. Remove valve body (1) from transmission.
21. Remove underdrive and overdrive accumulators
(1, 2).
ND
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
21 - 267
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст