Dodge Dakota (ND). Manual — part 906
35. Put a hole in the center of the countershaft plug
(2) with a punch (1).
36. Remove countershaft plug (1) from front housing
with Puller 9667 (2) and Slid Hammer C-3752.
37. Install Wrench 9586 (1) on input shaft (2).
21 - 16
MANUAL TRANSMISSION-GETRAG 238
ND
38. Remove countershaft allen bolt (1).
39. Remove input shaft wrench.
40. Remove two detent plugs from the side of the
housing with Remover 8870 (1) and Slide Ham-
mer C-3752 (2).
41. Remove 3-4 (2) and 5-6 (1) shift fork pivot bolts
from both sides of the front housing.
ND
MANUAL TRANSMISSION-GETRAG 238
21 - 17
42. Install Puller 9621(1) with puller Plug 9621-2 (2)
on front housing. Tighten puller bolts evenly and
remove front housing from the mainshaft and
countershaft.
43. Remove 5-6 shift fork (3) and 3-4 shift fork (4).
Then remove 5-6 shift rail (1) and 3-4 shift rail (2)
from Fixture 9626.
21 - 18
MANUAL TRANSMISSION-GETRAG 238
ND
44. Remove input shaft (1) from mainshaft (2).
45. Remove input shaft bearing (1) from mainshaft
(2).
ND
MANUAL TRANSMISSION-GETRAG 238
21 - 19
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст