Lincoln MKC (2019 year). Manual — part 8
Blind Spot Information and Cross Traffic Alert System
Action
Message
A fault with the system has occurred. Contact an authorized dealer as soon as possible.
Blindspot System Fault
The system sensors are blocked. See Blind Spot Information System (page 224).
Blindspot Not Available Sensor Blocked
See Manual
The system detects a vehicle. See Blind Spot Information System (page 224).
Vehicle Coming From X
The blind spot information system and cross traffic alert system sensors are blocked. See Blind
Spot Information System (page 224).
Cross Traffic Not Available Sensor Blocked
See Manual
A fault with the system has occurred. Contact an authorized dealer as soon as possible.
Cross Traffic System Fault
Collision Warning System
Action
Message
A fault with the system has occurred. Contact an authorized dealer as soon as possible.
Collision Warning Malfunction
You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor.
You can typically clean the sensor to resolve. See Pre-Collision Assist (page 231).
Collision Warning Not Available Sensor
Blocked See Manual
A fault with the system has occurred. Contact an authorized dealer as soon as possible.
Collision Warning Not Available
119
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Doors and Locks
Action
Message
The door(s) listed is not completely closed.
X Door Ajar
The luggage compartment is not completely closed.
Trunk Ajar
The hood is not completely closed.
Hood Ajar
The system has disabled the door switches.
Switches Inhibited Security Mode
There is a system malfunction with the child locks. Contact an authorized dealer as soon as
possible.
Child Lock Malfunction Service Required
The factory keypad code displays in the information display after system resets the keypad.
Factory Keypad Code {X X X X X}
Driver Alert
Action
Message
Stop and rest as soon as it is safe to do so.
Driver Alert Warning Rest Now
Take a rest soon.
Driver Alert Warning Rest Suggested
120
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Fuel
Action
Message
An early reminder of a low fuel condition.
Fuel Level Low
The fuel fill inlet may not be properly closed.
Check Fuel Fill Inlet
Hill Start Assist
Action
Message
Hill start assist is not available. Contact an authorized dealer. See Auto Hold (page 190).
Hill Start Assist Not Available
Keys and Intelligent Access
Action
Message
A reminder to press the brake while starting the vehicle.
To START Press Brake
The system does not detect a key in your vehicle. See Keyless Starting (page 156).
No Key Detected
You pressed the start/stop button to switch off the engine and your vehicle does not detect your
intelligent access key inside your vehicle.
Restart Now or Key is Needed
Your vehicle is in the run ignition state.
Full Accessory Power Active
There is a problem with your vehicle’s starting system. See an authorized dealer for service.
Starting System Fault
121
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Action
Message
You have successfully programmed an intelligent access key to the system.
Key Program Successful
You have failed to program an intelligent access key to the system.
Key Program Failure
You have programmed the maximum number of keys to the system.
Max Number of Keys Learned
You have not programmed enough keys to the system.
Not Enough Keys Learned
The key battery is low. Change the battery as soon as possible.
Key Battery Low Replace Soon
Inform the driver that they are exiting the vehicle and the engine is on.
Engine ON
Lane Keeping System
Action
Message
The system has malfunctioned. Contact an authorized dealer as soon as possible.
Lane Keeping Sys. Malfunction Service
Required
The system has detected a condition that has caused the system to be temporarily unavailable.
Front Camera Temporarily Not Available
The system has detected a condition that requires you to clean the windshield in order for it to
operate properly.
Front Camera Low Visibility Clean Screen
The system has malfunctioned. Contact an authorized dealer as soon as possible.
Front Camera Malfunction Service
Required
The system requests the driver to keep their hands on the steering wheel.
Keep Hands on Steering Wheel
122
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Maintenance
Action
Message
Stop your vehicle as soon as safely possible and turn off the engine. Check the oil level. If the
warning stays on or continues to come on with your engine running, contact an authorized dealer
as soon as possible.
Low Engine Oil Pressure
The engine oil life remaining is 10% or less. See Engine Oil Check (page 289).
Change Engine Oil Soon
The oil life left is at 0%. See Engine Oil Check (page 289).
Oil Change Required
The brake fluid level is low, inspected the brake system immediately. See Brake Fluid Check
Brake Fluid Level Low
The brake system needs servicing. Stop your vehicle in a safe place. Contact an authorized
dealer.
Check Brake System
The engine coolant temperature is excessively high.
Engine Coolant Over Temperature
The washer fluid is low, refill washer fluid.
Washer Fluid Level Low
The engine has reduced power to help reduce high engine temperature.
Power Reduced to Lower Engine Temp
Your vehicle is still in Transport or Factory mode. This may not allow some features to operate
properly. See an authorized dealer.
Transport / Factory Mode Contact Dealer
The powertrain needs service due to a powertrain malfunction.
See Manual
123
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MyKey
Action
Message
You cannot program a MyKey.
MyKey not Created
MyKey is active.
MyKey Active Drive Safely
When switching on your vehicle and MyKey is in use, displays that the MyKey speed limit is on.
Speed Limited to XX MPH/km/h
MyKey is in use and the MyKey speed limit is on and the vehicle speed is approaching 80 mph
(130 km/h).
Near Vehicle Top Speed
You have reached the speed limit set for your MyKey.
Vehicle at Top Speed of MyKey Setting
You have an active MyKey with a programmed set speed limit.
Check Speed Drive Safely
Belt-Minder turns on with a MyKey in use.
Buckle Up to Unmute Audio
With a MyKey in use, AdvanceTrac turns on.
AdvanceTrac On - MyKey Setting
With a MyKey in use, traction control turns on.
Traction Control On - MyKey Setting
With a MyKey in use, park aid is always on.
MyKey Park Aid Cannot be Deactivated
With a MyKey in use, lane keeping alert turns on.
Lane Keeping Alert On MyKey Setting
124
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Park Aid
Action
Message
The system has detected a condition that requires service. Contact an authorized dealer. See
Check Front Park Aid
The system has detected a condition that requires service. Contact an authorized dealer. See
Check Rear Park Aid
Displays the park aid status.
Front Park Aid On Off
Displays the park aid status.
Rear Park Aid On Off
Park Brake
Action
Message
You have set the parking brake and you have driven the vehicle more than 3 mph (5 km/h). If
the warning stays on after you have released the parking brake, contact an authorized dealer.
Park Brake Engaged
The electric parking brake system has detected a condition that requires service. See an
authorized dealer.
Park Brake Malfunction Service Now
The electric parking brake is not set.
Park Brake Not Applied
The electric parking brake is running a diagnostic check.
Park Brake Maintenance Mode
The electric parking brake is set but you have not released it.
Park Brake Use Switch to Release
125
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Action
Message
The electric parking brake is set but you have not released it and your vehicle is moving.
To Release: Press Brake and Switch
The electric park brake system has detected a condition that requires service. See an authorized
dealer.
Park Brake Limited Function Service
Required
You have not released the electric parking brake causing it to overheat.
Park Brake System Overheated
The electric parking brake is set and you have started your vehicle.
Release Park Brake
The electric parking brake is set.
Park Brake Applied
You have released the electric parking brake.
Park Brake Released
Power Steering
Action
Message
The power steering system has detected a condition that requires service. See an authorized
dealer.
Steering Fault Service Now
The power steering system is not working. Stop your vehicle in a safe place. Contact an
authorized dealer.
Steering Loss Stop Safely
The power steering system has detected a condition within the power steering system or passive
entry or passive start system requires service. Contact an authorized dealer.
Steering Assist Fault Service Required
126
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Remote Start
Action
Message
A reminder to apply the brake and push the gearshift button to drive your vehicle after a remote
start.
To Drive: Press Brake and Gear Shift
Button
Seats
Action
Message
A reminder that memory seats are not available while driving.
Memory Recall Not Permitted While Driving
Shows where you have saved your memory setting.
Memory {0} Saved
Starting System
Action
Message
A reminder to apply the brake when starting your vehicle .
To START Press Brake
The starter has exceeded its cranking time in attempting to start your vehicle.
Cranking Time Exceeded
The starter is attempting to start your vehicle.
Engine Start Pending Please Wait
The system has cancelled the pending start.
Pending Start Cancelled
127
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Tire Pressure Monitoring System
Action
Message
One or more tires on your vehicle has low tire pressure. See Tire Pressure Monitoring System
Tire Pressure Low
The tire pressure monitoring system is malfunctioning. If the warning stays on or continues to
come on, contact an authorized dealer. See Tire Pressure Monitoring System (page 330).
Tire Pressure Monitor Fault
A tire pressure sensor is malfunctioning or your spare tire is in use. See Tire Pressure Monitoring
System (page 330). If the warning stays on or continues to come on, contact an authorized dealer
as soon as possible.
Tire Pressure Sensor Fault
Traction Control
Action
Message
The status of the traction control system after you switch it off.
Traction Control Off
The status of the traction control system after you switch it on.
Traction Control On
A spinout has occurred and the hazards are on.
Spinout Detected Hazards Activated
128
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Trailer
Action
Message
Displays when the trailer sway control has detected a trailer sway. See Trailer Sway Control
Trailer Sway Reduce Speed
Transmission
Action
Message
See an authorized dealer.
Transmission Malfunction Service Now
The transmission is overheating and needs to cool. Stop in a safe place as soon as possible.
Transmission Overheating Stop Safely
See an authorized dealer.
Transmission Service Required
The transmission is overheating and needs to cool. Stop in a safe place as soon as possible.
Transmission Too Hot Press Brake
The transmission has limited functionality. See an authorized dealer.
Transmission Limited Function See Manual
The transmission is too cold. Wait for it to warm up before you drive.
Transmission Warming Up Please Wait
A reminder to shift into park. In addition, this message is typical after reconnecting or recharging
the battery until you cycle the ignition to the on mode. See Changing the 12V Battery (page
Transmission Not in Park
The transmission has adjusted the shift strategy.
Transmission Adjusted
The transmission is adjusting the shift strategy.
Transmission AdaptMode
129
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Action
Message
The transmission is locked and unable to select gears.
Transmission IndicatMode Lockup On
The transmission is unlocked and free to select gears.
Transmission IndicatMode Lockup Off
You have selected an invalid gear.
Invalid Gear Selection
You need to depress the brake pedal.
Press Brake Pedal
You need to depress the brake pedal before you can shift from P park.
Depress Brake to Shift from Park
You need to press the N neutral button again to enter neutral hold. See Automatic Transmission
To Stay in Neutral When Exiting Vehicle
Select N Again
Neutral hold is active. See Automatic Transmission (page 175).
Stay in Neutral Mode Engaged
Neutral hold is active. See Towing the Vehicle on Four Wheels (page 250).
Stay in Neutral Tow Engaged See Manual
to Disable
There is a system fault and you need to depress the park brake before you exit your vehicle.
See an authorized dealer.
SHIFT SYS FAULT Confirm Park Brake
Apply Before Exiting the Vehicle
There is a system fault and you need to depress the park brake before you exit your vehicle.
See an authorized dealer.
SHIFT SYS FAULT Cannot Shift Trans Use
Park Brake to Secure Vehicle
See an authorized dealer.
SHIFT SYS FAULT Service Required
There is a system fault while you are shifting your vehicle to P park. See an authorized dealer.
SHIFT SYS FAULT Vehicle is Shifting to
Park
130
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Action
Message
There is a system fault while you are shifting your vehicle to R reverse. See your authorized
dealer.
SHIFT SYS FAULT Reverse Unavailable
Service Required
See an authorized dealer.
SHIFT SYS FAULT Drive Unavailable Select
S for Drive Service Required
See an authorized dealer.
SHIFT SYS FAULT Neutral Unavailable
Service Required
See an authorized dealer.
SHIFT SYS FAULT Neutral Unavailable
Service Required
Neutral tow is active and you need to turn the ignition off. See Towing the Vehicle on Four
Neutral Tow Engaged Turn Ignition Off for
Towing
While attempting to exit neutral tow, you need to depress the brake pedal and select the P park
button to deactivate. See Towing the Vehicle on Four Wheels (page 250).
Neutral Tow Engaged Depress Brake and
Select Park to Exit Neutral Tow
Neutral tow is active and you need to release the park brake. See Towing the Vehicle on Four
Neutral Tow Remove Park Brake for
Towing
You have switched off Neutral tow.
Neutral Tow Disengaged
131
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Information Displays
-------------------------------------------------------------------------------------------------------------------------------------------------------------
AUTOMATIC CLIMATE CONTROL
Note: You can switch temperature units
between Fahrenheit and Celsius. See your
SYNC information.
E211718
132
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Climate Control
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Left-hand temperature control.
A
Fan speed control.
B
Right-hand temperature control.
C
MAX A/C.
D
A/C.
E
Recirculated air.
F
Heated seats.
G
Climate controlled seats.
H
Dual.
I
Auto.
J
Power.
K
Defrost.
L
Heated rear window.
M
Left-hand Temperature Control
Adjusts the temperature setting on the
left-hand side. This control also adjusts the
right-hand side temperature when you switch
off dual zone mode.
Fan Speed Control
Adjusts the volume of air circulated in the
vehicle.
Right-hand Temperature Control
Adjusts the temperature setting on the
right-hand side.
MAX A/C
Press for maximum cooling. The left-hand
and right-hand settings set to LO,
recirculated air flows through the instrument
panel vents, air conditioning turns on and
the fan adjusts to the highest speed.
A/C
Press to switch the air conditioning on or off.
Use A/C with recirculated air to improve
cooling performance and efficiency.
Note: In certain conditions (for example,
maximum defrost), the air conditioning
compressor may continue to operate even
though you switch off the air conditioning.
Recirculated Air
Press to switch between outside air and
recirculated air. The air currently in the
passenger compartment recirculates. This
may reduce the time needed to cool the
interior (when used with A/C) and reduce
unwanted odors from entering your vehicle.
Note: Recirculated air may turn off (or
prevent you from switching on) in all air flow
modes except MAX A/C to reduce the risk
of fogging. Recirculation may also turn on
and off in various air distribution control
combinations during hot weather in order to
improve cooling efficiency.
Heated Seats
(If Equipped)
Press to cycle through the various heat
settings and off. See Heated Seats (page
145).
Climate Controlled Seats
(If Equipped)
Press to cycle through the various settings
and off. See Climate Controlled Seats (page
146).
133
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Climate Control
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Dual
Press to switch on temperature control for
the right-hand side of the vehicle. When dual
zone is off, right-hand temperature settings
remain the same as the left-hand settings.
Auto
Press to switch on automatic operation.
Adjust to select the desired temperature. Fan
speed, air distribution, air conditioning
operation, and outside or recirculated air
adjust to heat or cool the vehicle to maintain
the desired temperature. You can also switch
off dual zone mode by pressing and holding
for more than two seconds.
Power
Press to switch the system on and off. When
the system is off, it prevents outside air from
entering the vehicle.
Defrost
Press to distribute air through the windshield
air vents and de-mister. Air directed to the
instrument panel and footwell air vents turns
off. You can also use this setting to defog
and clear the windshield of a thin covering
of ice.
Heated Rear Window
Press to switch the heated rear window on
and off. See Heated Rear Window (page
135).
HINTS ON CONTROLLING THE
INTERIOR CLIMATE
General Hints
Note: Prolonged use of recirculated air may
cause the windows to fog up.
Note: You may feel a small amount of air
from the footwell air vents regardless of the
air distribution setting.
Note: To reduce humidity build-up inside
your vehicle, do not drive with the system
switched off or with recirculated air always
switched on.
Note: Do not place objects under the front
seats as this may interfere with the airflow
to the rear seats.
Note: Remove any snow, ice or leaves from
the air intake area at the base of the
windshield.
Note: To improve the time to reach a
comfortable temperature in hot weather,
drive with the windows open until you feel
cold air through the air vents.
Automatic Climate Control
Note: Adjusting the settings when your
vehicle interior is extremely hot or cold is not
necessary.
Note: The system adjusts to heat or cool the
interior to the temperature you select as
quickly as possible.
Note: For the system to function efficiently,
the instrument panel and side air vents
should be fully open.
134
MKC (TME) Canada/United States of America, enUSA, Edition date: 201802, First Printing
Climate Control
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст