Dodge Durango (HB). Manual — part 1090
13. Install cylinder head covers (1) (Refer to 9 -
ENGINE/CYLINDER
HEAD/CYLINDER
HEAD
COVER(S) - INSTALLATION).
14. Connect the evaporation control system.
15. Install the air cleaner (Refer to 9 - ENGINE/AIR
INTAKE SYSTEM - INSTALLATION).
16. Install cowl grille (4).
17. Fill cooling system (Refer to 7 - COOLING -
STANDARD PROCEDURE).
18. Connect the negative cable to the battery.
19. Start engine check for leaks.
HB
ENGINE - 5.7L SERVICE INFORMATION
9 - 1359
COVER-CYLINDER HEAD
REMOVAL
1. Disconnect battery negative cable.
2. Disconnect coil on plug connectors (4).
CAUTION: The ground straps must be installed in
the same location as removed. The covers are
machined to accept the ground straps in those
locations only.
9 - 1360
ENGINE - 5.7L SERVICE INFORMATION
HB
3. Remove cylinder head cover retaining bolts, and
ground straps.
HB
ENGINE - 5.7L SERVICE INFORMATION
9 - 1361
4. Remove cylinder head cover (1).
9 - 1362
ENGINE - 5.7L SERVICE INFORMATION
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст