Dodge Durango (HB). Manual — part 1231
6. Remove oil filter (1) from valve body. It is held in
place by two screws.
7. Remove valve body bolts-to-case (1).
CAUTION: The overdrive and underdrive accumu-
lators and springs may fall out when removing the
valve body.
8. Carefully remove valve body assembly (1) from the
transmission.
HB
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
21 - 329
DISASSEMBLY
NOTE: If the valve body is being reconditioned or replaced, it is necessary to perform the Quick Learn Pro-
cedure using the scan tool (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES/TRANSMISSION
CONTROL MODULE - STANDARD PROCEDURE)
1. Remove manual shaft seal.
2. Remove manual shaft screw (1).
3. Remove Transmission Range Sensor (TRS) (1)
and manual shaft (2).
21 - 330
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
HB
4. Remove Solenoid/Pressure Switch Assembly (1)
from valve body.
5. Remove valve body stiffener plate (1).
6. Invert valve body assembly and remove transfer
plate-to-valve body screws (1).
HB
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
21 - 331
7. Remove transfer/separator plate (1) from valve
body (2)
8. Remove separator plate-to-transfer plate screws
(2).
21 - 332
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст