Dodge Durango (HB). Manual — part 126
8. Remove the HCU assembly (2) through the left
wheel well (1).
INSTALLATION
NOTE: If the ABM is being replaced with a new
ABM it must be reprogrammed with the use of a
scantool.
1. Reinstall the HCU assembly (2) through the left
wheel well (1).
2. Install HCU assembly (2) on the mounting bracket
(1) and Tighten the nuts to 15 N·m (11 ft. lbs.).
HB
BRAKES - ABS SERVICE INFORMATION
5 - 283
3. Install the brake lines (1) to the HCU (2) and
tighten to 19 N·m (170 in. lbs.).
4. Install the electrical harness connector (2) to the
HCU/ABM assembly (1).
5. Install the left front tire.
6. Install the battery cables to the battery.
7. Bleed ABS brake system (Refer to 5 - BRAKES -
STANDARD PROCEDURE).
5 - 284
BRAKES - ABS SERVICE INFORMATION
HB
COOLING
TABLE OF CONTENTS
page
page
COOLING
. . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
COOLING SYSTEM - TESTING FOR LEAKS
. . . . . . . . . . . . . . . . . 7
ENGINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . . . 15
COOLING SYSTEM CLEANING/REVERSE
FLUSHING . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . . . . 18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
. . . . . . . . . . . . . . . . . . . . . . . . . 53
HB
COOLING
7 - 1
COOLING
DESCRIPTION
3.7L/4.7L COOLANT FLOW
1 - LH CYL. HEAD
2 - BLEED
3 - THERMOSTAT LOCATION
4 - RH CYL. HEAD
5 - RH BANK CYL. BLOCK
6 - LH BANK CYL. BLOCK
7 - COOLANT TEMP. SENSOR
8 - FROM HEATER CORE
9 - TO HEATER CORE
7 - 2
COOLING
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст