Dodge Durango (HB). Manual — part 1083
19. Remove engine front mount thru-bolt nuts (3).
20. Disconnect the transmission oil cooler lines from
their retainers at the oil pan bolts.
21. Disconnect exhaust pipe at manifolds.
22. Disconnect the starter wires. Remove starter
motor (1) (Refer to 8 - ELECTRICAL/STARTING/
STARTER MOTOR - REMOVAL).
23. Remove the structural dust cover and transmis-
sion inspection cover, (Refer to 9 - ENGINE/EN-
GINE
BLOCK/STRUCTURAL
COVER
-
REMOVAL).
HB
ENGINE - 5.7L SERVICE INFORMATION
9 - 1331
24. Remove drive plate to converter bolts (Automatic
transmission equipped vehicles).
25. Remove transmission bell housing to engine block
bolts (2).
NOTE: Do not use air tools to install engine lift fix-
ture (2) special tool # 8984.
26. Install engine lift fixture (2), special tool # 8984.
Do not use adapter (4)
27. Separate
engine
from
transmission,
remove
engine from vehicle, and install engine assembly
on a repair stand.
9 - 1332
ENGINE - 5.7L SERVICE INFORMATION
HB
INSTALLATION
NOTE: Do not use air tools to install engine lift fix-
ture (2) special tool # 8984.
1. Install engine lift fixture (2), special tool # 8984. Do
not use adapter (4).
2. Position the engine in the engine compartment.
3. Lower engine into compartment and align engine
with transmission.
4. Lower engine assembly until engine mount through
bolts rest in mount brackets.
5. Install remaining transmission to engine block
mounting bolts (2)and tighten.
HB
ENGINE - 5.7L SERVICE INFORMATION
9 - 1333
6. Tighten engine mount thru bolts (3).
7. Install drive plate to torque converter bolts.
8. Install the structural dust cover, (Refer to 9 -
ENGINE/ENGINE BLOCK/STRUCTURAL COVER -
INSTALLATION).
9. Install the starter (1) and connect the starter wires
(Refer to 8 - ELECTRICAL/STARTING/STARTER
MOTOR - INSTALLATION).
9 - 1334
ENGINE - 5.7L SERVICE INFORMATION
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст