Dodge Durango (HB). Manual — part 1096
REMOVAL - CAMSHAFT
1. Remove the battery negative cable.
2. Remove the air cleaner assembly. (Refer to 9 -
ENGINE/AIR INTAKE SYSTEM - REMOVAL)
3. Drain coolant. (Refer to 7 - COOLING - STAN-
DARD PROCEDURE)
4. Remove the accessory drive belt. (Refer to 7 -
COOLING/ACCESSORY DRIVE/DRIVE BELTS -
REMOVAL)
5. Remove the generator.
6. Remove the A/C compressor, and set aside.
7. Remove the radiator (Refer to 7 - COOLING/EN-
GINE/RADIATOR - REMOVAL).
8. Remove intake manifold (Refer to 9 - ENGINE/
MANIFOLDS/INTAKE MANIFOLD - REMOVAL).
9. Remove cylinder head covers (Refer to 9 -
ENGINE/CYLINDER
HEAD/CYLINDER
HEAD
COVER(S) - REMOVAL).
HB
ENGINE - 5.7L SERVICE INFORMATION
9 - 1383
10. Remove both left and right cylinder heads (4)
(Refer
to
9
-
ENGINE/CYLINDER
HEAD
-
REMOVAL).
11. Remove the oil pan (Refer to 9 - ENGINE/LUBRI-
CATION/OIL PAN - REMOVAL).
9 - 1384
ENGINE - 5.7L SERVICE INFORMATION
HB
12. Remove timing case cover (1) (Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT / CHAIN COVER(S) -
REMOVAL).
13. Remove the oil pick up tube.
HB
ENGINE - 5.7L SERVICE INFORMATION
9 - 1385
14. Remove the oil pump (figure 2) (Refer to 9 - ENGINE/LUBRICATION/OIL PUMP - REMOVAL).
15. Remove timing chain (2) (Refer to 9 - ENGINE/
VALVE
TIMING/TIMING
BELT/CHAIN
AND
SPROCKETS - REMOVAL).
16. Remove camshaft tensioner/thrust plate assembly.
9 - 1386
ENGINE - 5.7L SERVICE INFORMATION
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст