Dodge Durango (HB). Manual — part 1406
PANEL-COWL SIDE TRIM
DESCRIPTION
COWL TRIM PANEL
1 - COWL TRIM PANEL
2 - SCREW
3 - FUSE PANEL DOOR (LEFT SIDE)
HB
INTERIOR
23 - 137
PLATE-LIFTGATE SCUFF
DESCRIPTION
CONSOLE-FLOOR
REMOVAL
1. Remove the rubber cup holder liners.
2. Remove the front (1), center (2) and rear screws
(3).
3. Lift the floor console up and disconnect the electri-
cal connector (4).
4. Slide the floor console back and remove.
LIFTGATE SCUFF PLATE
1 - SCREWS (2)
2 - LIFTGATE SCUFF PLATE
23 - 138
INTERIOR
HB
INSTALLATION
1. Position the floor console in the vehicle and con-
nect the electrical connector (4).
2. Slide the console forward and engage the front
with the instrument panel.
3.
install the screws (3, 2 & 1).
4. Install the rubber cup holder liners.
CARPET
REMOVAL
1. Remove the front seats. (Refer to 23 - BODY/
SEATS/SEAT - FRONT - REMOVAL)
2. Remove the floor console. (Refer to 23 - BODY/IN-
TERIOR/FLOOR CONSOLE - REMOVAL)
3. Using a trim stick C-4755 or equivalent, remove the
door sill scuff plates. (Refer to 23 - BODY/INTERI-
OR/DOOR SILL SCUFF PLATE - DESCRIPTION)
4. Remove the cowl trim panels. (Refer to 23 - BODY/
INTERIOR/COWL TRIM COVER - DESCRIPTION)
5. Fold the second row seats forward and remove the
right and left side bolts (1 & 2).
6. Remove the second row seat assembly.
HB
INTERIOR
23 - 139
7. Remove the third row seat assembly, if equipped. (Refer to 23 - BODY/SEATS/SEAT - THIRD ROW -
REMOVAL)
8. Remove the bolts (1 & 2) and remove storage bin, if equipped.
9. Remove the carpet from under the side trim panels.
10. Remove the carpet.
23 - 140
INTERIOR
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст