Dodge Durango (HB). Manual — part 1360
9. Remove the shift sector o-ring (2).
MAINSHAFT
1. Remove intermediate clutch shaft snap-ring (1).
2. Remove the intermediate clutch shaft thrust ring
(1).
HB
TRANSFER CASE - NV244 GENII - SERVICE INFORMATION
21 - 845
3. Remove the intermediate clutch shaft (1).
4. Remove the differential snap-ring (1).
5. Remove the differential assembly (1) from the
mainshaft (2).
21 - 846
TRANSFER CASE - NV244 GENII - SERVICE INFORMATION
HB
6. Remove the mode hub and mode hub retainer (2)
from the differential assembly (1).
7. Remove the mode hub retainer (1) from the mode
hub (2).
INPUT AND PLANETARY GEAR
1. Remove the input gear seal with suitable screw
and slide hammer.
2. Remove the input gear retaining ring (2) with heavy
duty snap-ring pliers.
HB
TRANSFER CASE - NV244 GENII - SERVICE INFORMATION
21 - 847
3. Place front case in horizontal position. Then
remove input gear and low range gear as an
assembly (2). Tap gear out of bearing with plastic
mallet, if necessary.
INPUT AND PLANETARY GEAR
1. Remove the snap-ring (1) that retains input gear in
low range gear.
2. Remove the retainer (3).
21 - 848
TRANSFER CASE - NV244 GENII - SERVICE INFORMATION
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст