Dodge Durango (HB). Manual — part 1116
INSTALLATION
1. Install the air dam (3) and install the screws (4).
2. Position fascia on bumper.
3. Seat the tabs (1) fully.
4. Install the screws (1) and (2) attaching the fascia to
the bumper.
5. Install the headlamps. (Refer to 8 - ELECTRICAL/
LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT
- INSTALLATION)
6. Install the grille. (Refer to 23 - BODY/EXTERIOR/
GRILLE - INSTALLATION)
HB
FRAME & BUMPERS
13 - 3
SUPPORT-FRONT FASCIA
REMOVAL
1. Remove the front fascia. (Refer to 13 - FRAME &
BUMPERS/BUMPERS/FRONT
FASCIA
-
REMOVAL)
2. Remove the front bolts next to the fog lights.
3. Disconnect the fog lamp electrical connectors, if
equipped.
4. Release the tabs and remove the bumper.
5. Remove the fog lamps from the bumper as neces-
sary. (Refer to 8 - ELECTRICAL/LAMPS/LIGHTING
- EXTERIOR/FOG LAMP UNIT - REMOVAL)
13 - 4
FRAME & BUMPERS
HB
INSTALLATION
1. Install the fog lamps into the bumper, if necessary.
(Refer to 8 - ELECTRICAL/LAMPS/LIGHTING -
EXTERIOR/FOG LAMP UNIT - INSTALLATION)
2. Position the bumper onto the bumper support and
seat the tabs fully.
3. Connect the fog lamp electrical connectors, if
equipped.
4. Install the front bolts next to the fog lamps.
5. Install the fascia. (Refer to 13 - FRAME &
BUMPERS/BUMPERS/FRONT FASCIA - INSTAL-
LATION)
HB
FRAME & BUMPERS
13 - 5
BUMPER-FRONT
REMOVAL
1. Remove the bumper. (Refer to 13 - FRAME &
BUMPERS/BUMPERS/FRONT
BUMPER
-
REMOVAL)
2. Remove the eight nuts (2) and remove the bumper
reinforcement (1).
INSTALLATION
1. Install the bumper support (1) and install the nuts
(2).
2. Tighten the nuts to 109 N·m (80 ft. lbs.).
3. Install the front bumper. (Refer to 13 - FRAME &
BUMPERS/BUMPERS/FRONT
BUMPER
-
INSTALLATION)
13 - 6
FRAME & BUMPERS
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст