Dodge Durango (HB). Manual — part 1204
24. Install low/reverse reaction plate (1) with flat side
up.
25. Install a new tapered snap ring (2) (tapered side
out).
HB
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
21 - 221
26. Make sure that the snap ring ends are oriented as
shown.
27. Measure low/reverse clutch pack. Set up dial indi-
cator (1) as shown. Press down clutch pack with
finger and zero dial indicator. Record measure-
ment in four (4) places and take average reading.
Low/Reverse clutch pack clearance is 0.84 to
1.60 mm (0.033 to 0.063 inch).
28. Select the proper low/reverse reaction plate to
achieve specifications.
21 - 222
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
HB
29. Install 2/4 clutch pack (1, 2).
NOTE: The 2/4 Clutch Piston has bonded seals
which
are
not
individually
serviceable.
Seal
replacement requires replacement of the piston
assembly.
30. Install 2/4 clutch belleville spring (1).
31. Verify the proper orientation of the return spring
(2) to the 2/4 retainer (3).
HB
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
21 - 223
32. Install 2/4 clutch retainer (1).
NOTE: Verify that Tool 5058A (1) is centered prop-
erly over the 2/4 clutch retainer (4) before com-
pressing. If necessary, fasten the 5058A bar to the
bellhousing flange with any combination of lock-
ing pliers and bolts to center the tool properly.
33. Set up Tool 5058 (1) as shown. Compress 2/4
clutch
just
enough
to
facilitate
snap
ring
installation.
34. Measure 2/4 clutch clearance: Set up dial indi-
cator (1) as shown. Press down clutch pack with
finger and zero dial indicator. Record measure-
ment in four (4) places and take average reading.
The 2/4 clutch pack clearance is 0.76 to 2.64
mm (0.030 to 0.104 inch). If not within specifica-
tions, the clutch is not assembled properly or is
excessively worn. There is no adjustment for
the 2/4 clutch clearance.
21 - 224
AUTOMATIC TRANSMISSION 42RLE - SERVICE INFORMATION
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст