Dodge Durango (HB). Manual — part 257
4. Remove the battery from the battery tray.
5. Remove the two upper bolts for the battery tray (1).
6. Remove the right front tire and wheel assembly
(Refer to 22 - TIRES/WHEELS/WHEELS - STAN-
DARD PROCEDURE).
7. Remove the right front wheelhouse splash shield
(Refer to 23 - BODY/EXTERIOR/LF WHEEL-
HOUSE SPLASH SHIELD - DESCRIPTION).
8. Remove the lower battery tray (1) mounting bolts
(2).
9. Remove the electrical routing clips at the battery
tray.
10. Remove the battery temperature sensor from the
battery tray (1). (Refer to 8 - ELECTRICAL/
CHARGING/BATTERY TEMPERATURE SENSOR
- REMOVAL).
11. Remove the battery tray (1) from the vehicle.
HB
BATTERY SYSTEM
8F - 25
INSTALLATION
1. Clean and inspect the battery tray (1). Refer to
Battery System for battery tray cleaning and
inspection procedures.
2. Position the battery tray (1) into the vehicle.
3. Install and tighten the lower bolts (2) that secure
the battery tray (1). Tighten the screws to 12.4 N·m
(110 in. lbs.).
4. Install the right front wheelhouse splash shield
(Refer to 23 - BODY/EXTERIOR/LF WHEEL-
HOUSE SPLASH SHIELD - DESCRIPTION).
5. Install the right front tire and wheel assembly
(Refer to 22 - TIRES/WHEELS/WHEELS - STAN-
DARD PROCEDURE).
6. Install the battery temperature sensor onto the bat-
tery tray (1). (Refer to 8 - ELECTRICAL/CHARG-
ING/BATTERY
TEMPERATURE
SENSOR
-
INSTALLATION).
7. Install and tighten upper bolts that secure the bat-
tery tray to fender frame. Tighten the screws to
12.4 N·m (110 in. lbs.).
8. Install the battery onto the battery tray (Refer to 8 -
ELECTRICAL/BATTERY
SYSTEM/BATTERY
-
INSTALLATION).
8F - 26
BATTERY SYSTEM
HB
9. Install and tighten the battery holddown (1) and bolt
(2).
10. Install the battery thermal guard (1).
HB
BATTERY SYSTEM
8F - 27
11. Reconnect the battery cables.
8F - 28
BATTERY SYSTEM
HB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст