Dodge Ram Truck 1500-2500-3500. Manual — part 1547
29. Remove intermediate plate (1) dowels (2) with a
suitable tool and remove intermediate plate.
30. Install Fixture 9626 (2) on main/countershaft and
shift rails. Turn fixture (2) with transmission (1)
over onto the fixture.
21 - 120
MANUAL TRANSMISSION - GETRAG 238 - SERVICE INFORMATION
DR/DH
31. Remove clutch release bearing support bolts (2)
and retainer (1).
32. Insert seal Remover 9667 through one input shaft
seal (1) disassembly hole (2).
33. Remove input shaft seal with Remover 9667 (1)
and Slide Hammer C-3752 (2).
DR/DH
MANUAL TRANSMISSION - GETRAG 238 - SERVICE INFORMATION
21 - 121
34. Remove input shaft snap ring.
35. Put a hole in the center of the countershaft plug
(2) with a punch (1).
36. Remove countershaft plug (1) from front housing
with Puller 9667 (2) and Slid Hammer C-3752.
21 - 122
MANUAL TRANSMISSION - GETRAG 238 - SERVICE INFORMATION
DR/DH
37. Install Wrench 9586 (1) on input shaft (2).
38. Remove countershaft allen bolt (1).
39. Remove input shaft wrench.
40. Remove two detent plugs from the side of the
housing with Remover 8870 (1) and Slide Ham-
mer C-3752 (2).
DR/DH
MANUAL TRANSMISSION - GETRAG 238 - SERVICE INFORMATION
21 - 123
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст