Dodge Ram Truck 1500-2500-3500. Manual — part 1659
18. Remove the outer snap-ring (3) securing the
transmission front cover (2) into the transmission
case.
19. Remove the inner snap-ring (1) securing the
transmission front cover to the oil pump.
20. Reaching through a case opening in the valve
body area with a long blunted tool, remove the
transmission front cover from the transmission
case.
21. Remove the bolts (1) holding the oil pump into the
transmission case.
22. Remove the oil pump (2). Hold inward on the
input shaft to prevent pulling the input clutch
assembly with the oil pump.
CAUTION: If the input shaft is not held during oil
pump removal, the input clutch assembly will
attempt to move forward with the oil pump and the
numbers 2, 3, or 4 bearings inside the input clutch
assembly may become dislodged.
23. Remove the number 1 thrust bearing (4) from the
input clutch assembly.
24. Remove the input clutch assembly (3) from the
transmission case.
25. Remove the number 5 thrust bearing (1) and
selective thrust plate (2) from the input clutch
assembly (3) , or the 4C clutch retainer/bulkhead.
21 - 568
AUTOMATIC TRANSMISSION - 45RFE/545RFE - SERVICE INFORMATION
DR/DH
26. Remove the 4C clutch retainer/bulkhead tapered
snap-ring (1) from the transmission case.
27. Remove the 4C clutch retainer/bulkhead (2) from
the transmission case.
28. Remove the front 2C clutch pack snap-ring (1)
from the transmission case.
29. Remove the 2C clutch pack (2, 3, 4) from the
transmission case.
DR/DH
AUTOMATIC TRANSMISSION - 45RFE/545RFE - SERVICE INFORMATION
21 - 569
30. Remove the rear selective plate (6) and number 6 thrust bearing (7) from the reaction annulus (8).
31. Remove the reaction annulus (8) from the reaction planetary carrier (3).
32. Remove the number 7 thrust bearing (5).
33. Remove the reaction sun gear (4).
34. Remove the number 8 thrust bearing (1) from the reaction planetary carrier (3).
35. Remove the reaction planetary carrier (3). Note that this planetary gear set has three pinion gears.
36. Remove the number 9 thrust bearing (2) from the reverse planetary gear set.
Remove Reaction Annulus and Carrier
1 - THRUST BEARING NUMBER 8
5 - THRUST BEARING NUMBER 7
2 - THRUST BEARING NUMBER 9
6 - THRUST PLATE (SELECT)
3 - REACTION PLANETARY CARRIER
7 - THRUST BEARING NUMBER 6
4 - REACTION SUN GEAR
8 - REACTION ANNULUS
21 - 570
AUTOMATIC TRANSMISSION - 45RFE/545RFE - SERVICE INFORMATION
DR/DH
37. Remove the snap-ring (1) holding the park sprag
gear onto the output shaft.
38. Remove the park sprag gear (1) from the output
shaft.
DR/DH
AUTOMATIC TRANSMISSION - 45RFE/545RFE - SERVICE INFORMATION
21 - 571
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст