Dodge Ram Truck 1500-2500-3500. Manual — part 2088
The NVLD pump (4) is attached to the EVAP canister.
1. Install new o-ring to EVAP canister.
25 - 24
EVAPORATIVE EMISSIONS
DR/DH
2. Align NVLD assembly into EVAP canister.
3. Rotate NVLD assembly until alignment tab drops
into slot.
4. Connect electrical connector to NVLD assembly.
5. Carefully install vapor/vacuum lines to NVLD pump.
The vapor/vacuum lines and hoses must be
firmly
connected.
Check
the
vapor/vacuum
lines at the NVLD pump, filter and EVAP canis-
ter purge solenoid for damage or leaks. If a leak
is present, a Diagnostic Trouble Code (DTC)
may be set.
6. If necessary, install skid plate(s).
DR/DH
EVAPORATIVE EMISSIONS
25 - 25
If Equipped With Vertically Mounted EVAP Canisters
The NVLD pump (4) is located at the front of fuel tank.
1. Snap NVLD pump (1) to EVAP canister until tab (2)
engages.
2. Connect electrical connector to NVLD pump.
3. Carefully install vapor/vacuum lines to NVLD pump.
The vapor/vacuum lines and hoses must be
firmly
connected.
Check
the
vapor/vacuum
lines at the NVLD pump, filter and EVAP canis-
ter purge solenoid for damage or leaks. If a leak
is present, a Diagnostic Trouble Code (DTC)
may be set.
4. If equipped, install skid plate(s).
25 - 26
EVAPORATIVE EMISSIONS
DR/DH
VALVE - PCV
DESCRIPTION
3.7L V-6 / 4.7L V-8
The 3.7L V-6 and 4.7L V-8 engines are equipped with
a closed crankcase ventilation system and a Positive
Crankcase Ventilation (PCV) valve (6).
This system consists of:
•
a PCV valve mounted to the oil filler housing.
The PCV valve is sealed to the oil filler housing
with an o-ring.
•
the air cleaner housing
•
two interconnected breathers (2) threaded into
the rear of each cylinder head.
•
tubes
and
hoses
to
connect
the
system
components.
DR/DH
EVAPORATIVE EMISSIONS
25 - 27
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст