Dodge Ram Truck 1500-2500-3500. Manual — part 1876
10. Remove the shift sector o-ring (2) from the front
housing (1).
MAINSHAFT
1. Remove the drive sprocket (3) retaining ring (2)
from the output shaft (1).
2. Remove the drive sprocket (3) thrust washer (2)
from the output shaft (1).
21 - 1436
TRANSFER CASE - NV243 - SERVICE INFORMATION
DR/DH
3. Remove drive sprocket (2) from the output shaft
(1).
4. Remove the clutch gear (2) from the output shaft
(1).
5. Remove the sprocket hub (2) from the output shaft
(1).
DR/DH
TRANSFER CASE - NV243 - SERVICE INFORMATION
21 - 1437
6. Remove the mode hub retaining ring (2) from the
output shaft (1).
7. Remove the mode hub (2) from the output shaft
(1).
INPUT AND PLANETARY GEAR
1. Remove input gear seal with suitable screw and
slide hammer.
2. Remove input gear (1) retaining ring (2) with heavy
duty snap-ring pliers.
21 - 1438
TRANSFER CASE - NV243 - SERVICE INFORMATION
DR/DH
3. Place front case in horizontal position. Then
remove input gear and low range gear as an
assembly (2). Tap gear out of bearing with plastic
mallet, if necessary.
INPUT AND PLANETARY GEAR
1. Remove snap-ring (1) that retains input gear in low
range gear.
2. Remove retainer (3).
DR/DH
TRANSFER CASE - NV243 - SERVICE INFORMATION
21 - 1439
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст