Dodge Ram Truck 1500-2500-3500. Manual — part 1119
P2121-PPS CONFORMANCE ERROR (CONTINUED)
12.
RETURN CIRCUIT SHORTED TO OTHER CIRCUITS
Measure the resistance between the APPS 1 return circuit at the ECM
connector and all other circuits in the ECM connector.
Yes
>> Go To 13
No
>> Repair the return circuit shorted to other circuits.
Perform POWERTRAIN VERIFICATION TEST VER - 1
(DIESEL). (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/ENGINE CONTROL MODULE - DIAG-
NOSIS AND TESTING)
13.
OPEN SIGNAL CIRCUIT
Measure the resistance of the APPS 2 signal circuit between the
APPS sensor connector and the ECM connector.
Yes
>> Go To 14
No
>> Repair or Replace the harness.
Perform POWERTRAIN VERIFICATION TEST VER - 1
(DIESEL). (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/ENGINE CONTROL MODULE - DIAG-
NOSIS AND TESTING)
9 - 1398
ENGINE - ELECTRICAL DIAGNOSTICS - DIESEL
DR/DH
P2121-PPS CONFORMANCE ERROR (CONTINUED)
14.
OPEN SUPPLY CIRCUIT
Measure the resistance of the APPS 2 supply circuit between the
APPS sensor connector and the ECM connector.
Is the resistance less than 10 ohms?
Yes
>> Go To 15
No
>> Repair or replace the open harness.
Perform POWERTRAIN VERIFICATION TEST VER - 1
(DIESEL). (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/ENGINE CONTROL MODULE - DIAG-
NOSIS AND TESTING)
15.
SIGNAL CIRCUIT SHORTED TO GROUND
Measure the resistance between the APPS 2 signal circuit at the sen-
sor connector and battery negative.
Is the resistance greater than 100 K ohms?
Yes
>> Go To 16
No
>> Repair the shorted harness.
Perform POWERTRAIN VERIFICATION TEST VER - 1
(DIESEL). (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/ENGINE CONTROL MODULE - DIAG-
NOSIS AND TESTING)
DR/DH
ENGINE - ELECTRICAL DIAGNOSTICS - DIESEL
9 - 1399
P2121-PPS CONFORMANCE ERROR (CONTINUED)
16.
SIGNAL CIRCUIT SHORTED TO OTHER CIRCUITS
Measure the resistance between the APPS 2 signal circuit at the ECM
connector and all other circuits in the ECM connector.
Is the resistance greater than 100 K ohms?
Yes
>> Go To 17
No
>> Repair the shorted signal circuit.
Perform POWERTRAIN VERIFICATION TEST VER - 1
(DIESEL). (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/ENGINE CONTROL MODULE - DIAG-
NOSIS AND TESTING)
17.
SUPPLY CIRCUIT SHORTED TO GROUND
Measure the resistance between the APPS 2 supply circuit at the sen-
sor connector and battery negative.
Is the resistance greater than 100 K ohms?
Yes
>> Go To 18
No
>> Repair the Supply circuit shorted to ground.
Perform POWERTRAIN VERIFICATION TEST VER - 1
(DIESEL). (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/ENGINE CONTROL MODULE - DIAG-
NOSIS AND TESTING)
9 - 1400
ENGINE - ELECTRICAL DIAGNOSTICS - DIESEL
DR/DH
P2121-PPS CONFORMANCE ERROR (CONTINUED)
18.
SUPPLY CIRCUIT SHORTED TO OTHER CIRCUITS
Measure the resistance between the APPS 2 supply circuit at the ECM
connector and all other circuits in the ECM connector.
Is the resistance greater than 100 K ohms?
Yes
>> Go To 19
No
>> Repair the supply circuit shorted to other circuits.
Perform POWERTRAIN VERIFICATION TEST VER - 1
(DIESEL). (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/ENGINE CONTROL MODULE - DIAG-
NOSIS AND TESTING)
19.
RETURN CIRCUIT OPEN
Measure the resistance on the APPS 2 return circuit between the sen-
sor connector and the ECM connector.
Is the resistance less than 10 ohms?
Yes
>> Go To 20
No
>> Repair the open return circuit.
Perform POWERTRAIN VERIFICATION TEST VER - 1
(DIESEL). (Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/ENGINE CONTROL MODULE - DIAG-
NOSIS AND TESTING)
DR/DH
ENGINE - ELECTRICAL DIAGNOSTICS - DIESEL
9 - 1401
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст