Dodge Ram Truck 1500-2500-3500. Manual — part 1355
9. Remove exhaust/intake rocker arm shafts using the
sequence shown.
10. Install rocker arm shaft (1) special tool# 9065.
9 - 2342
ENGINE - 5.7L - SERVICE INFORMATION
DR/DH
DR/DH
ENGINE - 5.7L - SERVICE INFORMATION
9 - 2343
11. Install spring compressor (1,3,), special tool#
9065, and exhaust adapter arm (1) tool # 9065if
needed.
NOTE: All valve springs and seals are removed in
the same manner.
12. Insert air hose (1) into spark plug hole and charge cylinder with air.
NOTE: Tap the top of the valve spring retainer to loosen the spring retainers locks.
13. Compress valve spring with valve spring compessor (3) tool # 9065and remove valve retainer locks.
14. Release spring compressor (3) and remove valve spring.
NOTE: The valve springs are interchangeable between intake and exhaust.
15. Remove valve seal.
9 - 2344
ENGINE - 5.7L - SERVICE INFORMATION
DR/DH
INSTALLATION
DR/DH
ENGINE - 5.7L - SERVICE INFORMATION
9 - 2345
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст