Dodge Ram Truck 1500-2500-3500. Manual — part 1359
7. Each tappet reused must be installed in the same position from which it was removed. When camshaft is
replaced, all of the tappets must be replaced.
8. Install tappets (2) and retaining yoke assembly (1). (Refer to 9 - ENGINE/ENGINE BLOCK/HYDRAULIC LIFT-
ERS (CAM IN BLOCK) - INSTALLATION).
9 - 2358
ENGINE - 5.7L - SERVICE INFORMATION
DR/DH
9. Install both left and right cylinder heads (4) (Refer
to 9 - ENGINE/CYLINDER HEAD - INSTALLA-
TION).
10. Install pushrods.
DR/DH
ENGINE - 5.7L - SERVICE INFORMATION
9 - 2359
11. Install rocker arms (Refer to 9 - ENGINE/CYLIN-
DER HEAD/ROCKER ARM / ADJUSTER ASSY -
INSTALLATION).
12. Install timing case cover (figure4) (Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT / CHAIN COVER(S) -
INSTALLATION).
13. Install the oil pan (Refer to 9 - ENGINE/LUBRICATION/OIL PAN - INSTALLATION).
9 - 2360
ENGINE - 5.7L - SERVICE INFORMATION
DR/DH
14. Install cylinder head covers (Refer to 9 - ENGINE/
CYLINDER HEAD/CYLINDER HEAD COVER(S) -
INSTALLATION).
15. Install intake manifold (Refer to 9 - ENGINE/MAN-
IFOLDS/INTAKE MANIFOLD - INSTALLATION).
16. Install the A/C compressor (2).
DR/DH
ENGINE - 5.7L - SERVICE INFORMATION
9 - 2361
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст