Dodge Ram Truck 1500-2500-3500. Manual — part 1579
25. Remove shift detent (1) assembly.
26. Drive roll pin down into front offset lever (3) until
loose.
27. Remove reverse lockout solenoid
28. Separate offset lever and guide plate to remove
the roll pin that was driven down in Step 26of this
procedure.
29. Remove two torx screws (2) located on the top of
the transmission case (1).
30. Remove clutch slave cylinder from transmission.
21 - 248
MANUAL TRANSMISSION - T56 - SERVICE INFORMATION
DR/DH
31. Remove all front adapter plate (2) bolts (3) except
one to hold the front adapter in place.
32. Stand transmission on Fixture 9387 and bolt
adapter to fixture.
33. Install on bench Fixture 9385.
34. Remove remaining adapter bolt and pry transmis-
sion case (1) upward. Remove offset lever from
shift rail and case from adapter plate (2).
DR/DH
MANUAL TRANSMISSION - T56 - SERVICE INFORMATION
21 - 249
35. Remove reverse rail (2) assembly.
36. Tilt countershaft (4) sideways and lift mainshaft
(1) and shift rail a (2) assemblies out of adapter
plate (3).
21 - 250
MANUAL TRANSMISSION - T56 - SERVICE INFORMATION
DR/DH
37. Remove countershaft (1) assembly.
38. Remove input shaft (2) from adapter (3).
DR/DH
MANUAL TRANSMISSION - T56 - SERVICE INFORMATION
21 - 251
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст