Dodge Ram Truck 1500-2500-3500. Manual — part 1670
Installer, Seal - 8253
Installer, Seal - 8254
Installer, Snap-ring - 8255
Stand, Support - 8257
Adapter, Pressure Tap - 8258-A
Adapter, Line Pressure - 8259
Fixture, Input Clutch Pressure - 8260
Plate, Alignment - 8261
21 - 612
AUTOMATIC TRANSMISSION - 45RFE/545RFE - SERVICE INFORMATION
DR/DH
End Play Set - 8266
Compressor, Spring - 8285
Installer, Bearing - 8320
Wrench, Filter - 8321
Installer, Piston - 8504
DR/DH
AUTOMATIC TRANSMISSION - 45RFE/545RFE - SERVICE INFORMATION
21 - 613
RETAINER/BULKHEAD-4C
DISASSEMBLY
1. Remove the 2C piston Belleville spring snap-ring (6) from the 4C retainer /bulkhead (13).
2. Remove the 2C piston Belleville spring (5) from the retainer/bulkhead (13).
3. Remove the 2C piston (2) from the retainer/bulkhead (13). Use 20 psi of air pressure to remove the piston if
necessary.
4. Remove the 4C clutch snap-ring (7) from the retainer/bulkhead (13).
5. Remove the 4C clutch pack (3, 4, 8) from the retainer/bulkhead (13).
4C Retainer/Bulkhead Components
1 - SEAL
8 - REACTION PLATE
2 - 2C PISTON
9 - SNAP-RING
3 - PLATE
10 - RETURN SPRING
4 - DISC
11 - SEAL
5 - 2C BELLEVILLE SPRING
12 - 4C PISTON
6 - SNAP-RING
13 - 4C RETAINER/BULKHEAD
7 - SNAP-RING (SELECT)
21 - 614
AUTOMATIC TRANSMISSION - 45RFE/545RFE - SERVICE INFORMATION
DR/DH
6. Using Spring Compressor 8250 (2) and a suitable
shop press (1), compress the 4C piston return
spring (10) and remove the snap-ring (9).
7. Remove the 4C piston return spring (10) and piston
(12) from the retainer/bulkhead (13). Use 20 psi of
air pressure to remove the piston if necessary.
ASSEMBLY
NOTE: Clean and inspect all components. Replace any components which show evidence of excessive wear
or scoring.
DR/DH
AUTOMATIC TRANSMISSION - 45RFE/545RFE - SERVICE INFORMATION
21 - 615
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст