Dodge Ram Truck 1500-2500-3500. Manual — part 1345
7. Tighten engine mount through bolts.
8. Install drive plate to torque converter bolts. (Auto-
matic transmission models)
9. Install the structural dust cover (1) and transmis-
sion dust cover, (Refer to 9 - ENGINE/ENGINE
BLOCK/STRUCTURAL COVER - INSTALLATION) .
10. Install the starter (1) and connect the starter wires
(Refer to 8 - ELECTRICAL/STARTING/STARTER
MOTOR - INSTALLATION).
9 - 2302
ENGINE - 5.7L - SERVICE INFORMATION
DR/DH
11. Install exhaust pipe to exhaust manifold bolts (2).
12. Lower the vehicle.
NOTE: Do not use air tools on engine lift fixture
(2) special tool # 8984.
13. Remove engine lift fixture (2), special tool # 8984.
14. Connect the fuel supply line (Refer to 14 - FUEL
SYSTEM/FUEL
DELIVERY/QUICK
CONNECT
FITTING - STANDARD PROCEDURE).
15. Reinstall the power steering pump.
16. Connect the heater hoses.
DR/DH
ENGINE - 5.7L - SERVICE INFORMATION
9 - 2303
17. Install the intake manifold.
18. Using a new gasket, install throttle body (Refer to
14 - FUEL SYSTEM/FUEL INJECTION/THROT-
TLE BODY - INSTALLATION).
19. Install the generator (2) and wire connections
(Refer to 8 - ELECTRICAL/CHARGING/GENERA-
TOR - INSTALLATION).
20. Install a/c compressor (2) (Refer to 24 - HEATING
& AIR
CONDITIONING/PLUMBING/A/C
COM-
PRESSOR - INSTALLATION).
9 - 2304
ENGINE - 5.7L - SERVICE INFORMATION
DR/DH
21. Install the accessory drive belt (Refer to 7 -
COOLING/ACCESSORY DRIVE/DRIVE BELTS -
INSTALLATION).
22. Install upper radiator support crossmember.
23. Install radiator (1) (Refer to 7 - COOLING/EN-
GINE/RADIATOR - INSTALLATION).
24. Connect the radiator lower hose.
25. Connect the transmission oil cooler lines to the
radiator.
DR/DH
ENGINE - 5.7L - SERVICE INFORMATION
9 - 2305
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст