Dodge Ram Truck 1500-2500-3500. Manual — part 4
VEHICLE CERTIFICATION LABEL
DESCRIPTION
A vehicle certification label is attached to every
DaimlerChrysler Corporation vehicle. The label certi-
fies that the vehicle conforms to all applicable Federal
Motor Vehicle Standards. The label also lists:
•
Month and year of vehicle manufacture.
•
Gross Vehicle Weight Rating (GVWR). The gross
front and rear axle weight ratings (GAWR’s) are
based on a minimum rim size and maximum cold
tire inflation pressure.
•
Vehicle Identification Number (VIN).
•
Type of vehicle.
•
Type of rear wheels.
•
Bar code.
•
Month, Day and Hour (MDH) of final assembly.
•
Paint and Trim codes.
•
Country of origin.
The label is located on the driver-side door shut-face.
14
INTRODUCTION
DR/DH
LUBRICATION & MAINTENANCE
TABLE OF CONTENTS
page
page
INTERNATIONAL SYMBOLS
. . . . . . . . . . . . . . . . . . . . . . . . . . 1
PARTS & LUBRICANT RECOMMENDATION
. . . . . . . . . . . . . . . . . . . . . . . . . 2
FLUID TYPES
. . . . . . . . . . . . . . . . . . . . . . . . . . 3
FUEL REQUIREMENTS - DIESEL ENGINE
. . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . . . 6
OPERATION - AUTOMATIC TRANSMISSION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
FLUID CAPACITIES
. . . . . . . . . . . . . . . . . . . . . 7
MAINTENANCE SCHEDULES
MAINTENANCE SCHEDULES . . . . . . . . . . . . 17
MAINTENANCE SCHEDULES - SRT/10
JUMP STARTING
STANDARD PROCEDURE - JUMP STARTING
HOISTING
TOWING
. . . . . . . . . . . . . . . . 37
INTERNATIONAL SYMBOLS
DESCRIPTION
DaimlerChrysler Corporation uses international sym-
bols to identify engine compartment lubricant and fluid
inspection and fill locations.
DR/DH
LUBRICATION & MAINTENANCE
0 - 1
PARTS & LUBRICANT RECOMMENDATION
DESCRIPTION
LUBRICANT RECOMMENDATIONS
Chassis
Component
Fluid, Lubricant, or Genuine Part
Steering Gear & Linkage, Ball
Joints, Prop Shafts & Yokes,
Wheel Bearings
Mopar
T
Multi-Purpose Lubricant NLGI Grade 2 EP, GC-LB
Body
Component
Fluid, Lubricant, and Genuine Part
Hinges:
Door & Hood
Mopar
T
Engine Oil
Swing Gate
Mopar
T
Multi-Purpose Lube NLGI Grade 2 EP, GC-LB
Latches: Door, Hood/Safety
Catch, Swing Gate
Mopar
T
Multi-Purpose Lube NLGI Grade 2 EP, GC-LB
Seat Regulator & Track
Mopar
T
Multi-Purpose Lube NLGI Grade 2 EP, GC-LB
Lock Cylinders
Mopar
T
Lock Cylinder Lube
FLUID TYPES
When service is required, DaimlerChrysler Corporation recommends that only Mopar
T
brand parts, lubricants and
chemicals be used. Mopar
T
provides the best engineered products for servicing DaimlerChrysler Corporation vehi-
cles.
Only lubricants bearing designations defined by the following organization should be used to service a Chrysler
Corporation vehicle.
•
Society of Automotive Engineers (SAE)
•
American Petroleum Institute (API)
•
National Lubricating Grease Institute (NLGI)
API QUALITY CLASSIFICATION
This symbol on the front of an oil container means
that the oil has been certified by the American Petro-
leum Institute (API) to meet all the lubrication require-
ments specified by DaimlerChrysler Corporation.
GEAR LUBRICANTS
SAE ratings also apply to multigrade gear lubricants. In addition, API classification defines the lubricants usage.
Such as API GL-5 and SAE 75W-90.
0 - 2
LUBRICATION & MAINTENANCE
DR/DH
FLUID TYPES
DESCRIPTION
ENGINE OIL
WARNING: NEW OR USED ENGINE OIL CAN BE IRRITATING TO THE SKIN. AVOID PROLONGED OR
REPEATED SKIN CONTACT WITH ENGINE OIL. CONTAMINANTS IN USED ENGINE OIL, CAUSED BY INTER-
NAL COMBUSTION, CAN BE HAZARDOUS TO YOUR HEALTH. THOROUGHLY WASH EXPOSED SKIN WITH
SOAP AND WATER. DO NOT WASH SKIN WITH GASOLINE, DIESEL FUEL, THINNER, OR SOLVENTS,
HEALTH PROBLEMS CAN RESULT. DO NOT POLLUTE, DISPOSE OF USED ENGINE OIL PROPERLY. CON-
TACT YOUR DEALER OR GOVERNMENT AGENCY FOR LOCATION OF COLLECTION CENTER IN YOUR
AREA.
Only lubricants bearing designations defined by the following organization should be used.
•
Society of Automotive Engineers (SAE)
•
American Petroleum Institute (API)
•
National Lubricating Grease Institute (NLGI)
•
Association des Constructeurs Européens d’ Automobiles (European Automobile Manufacturers Association)
(ACEA)
API SERVICE GRADE CERTIFIED
Use an engine oil that is API Certified. MOPAR
T
provides engine oils, that meet or exceed this requirement.
SAE VISCOSITY
An SAE viscosity grade is used to specify the viscosity
of engine oil. Use only engine oils with multiple viscos-
ities such as 5W-30 or 10W-30. These are specified
with a dual SAE viscosity grade which indicates the
cold-to-hot temperature viscosity range. Select an
engine oil that is best suited to your particular temper-
ature range and variation. For 3.7L/4.7L engines SAE
5W-30 engine oil is recommended for all operating
temperatures. For 5.7L engines SAE 5W-20 engine
oil is recommended for all operating temperatures-
.These engine oils improve low temperature start-
ing and vehicle fuel economy. Refer to your engine
oil filler cap for the recommended engine oil vis-
cosity for your vehicle.
ACEA Categories
For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils that meet the require-
ments of ACEA A1/B1, A2/B2, or A3/B3.
ENERGY CONSERVING OIL
An Energy Conserving type oil is recommended for gasoline engines. The designation of ENERGY CONSERVING
is located on the label of an engine oil container.
DR/DH
LUBRICATION & MAINTENANCE
0 - 3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст