Dodge Ram Truck 1500-2500-3500. Manual — part 1451
3. Support the transmission (1) with a transmission
jack (2) or suitable lifting device.
4. 2WD Vehicles - Remove the transmission mount
nuts (3).
5. Remove the bolts and remove the crossmember
(2).
6. 4WD Vehicles - Remove the transmission mount
nuts (5).
7. Remove the bolts and remove the crossmember
(3).
13 - 54
FRAME & BUMPERS
DR/DH
INSTALLATION
1. On Light Duty Vehicles, install the crossmember
(2) and the bolts (4). Tighten the bolts to 102 N·m
(75 ft. lbs.).
2. Install the transmission mount nuts and tighten to
54 N·m (40 ft. lbs.).
3. On Heavy Duty Vehicles, install the crossmember
(4) and the bolts (3). Tighten the bolts to 115 N·m
(85 ft. lbs.).
4. Install the transmission mount nuts and tighten to
54 N·m (40 ft. lbs.).
5. Remove the transmission support (2).
DR/DH
FRAME & BUMPERS
13 - 55
6. Install the transfer case skid plate (3 - if equipped)
(Refer to 13 - FRAME & BUMPERS/FRAME/
TRANSFER CASE SKID PLATE - INSTALLATION).
TRAILER HITCH
REMOVAL
1. Remove the rear bumper (Refer to 13 - FRAME & BUMPERS/BUMPERS/REAR BUMPER - REMOVAL).
2. On Light Duty Vehicles, remove the hitch bolts (7)
13 - 56
FRAME & BUMPERS
DR/DH
3. On Heavy Duty Vehicles, remove the hitch bolts (8)
4. Disconnect all wire harness support push pins.
5. Remove the rear two cargo box bolts (3) and
loosen the remaining bolts (Refer to 23 - BODY/
EXTERIOR/CARGO BOX - REMOVAL).
6. Using a suitable lifting device, lift and support the
rear of the cargo box and remove the hitch.
DR/DH
FRAME & BUMPERS
13 - 57
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст