Dodge Ram Truck 1500-2500-3500. Manual — part 1786
DISASSEMBLY
1. Remove transmission speed sensor (2) and o-ring
seal (3) from overdrive case.
2. Remove overdrive piston thrust bearing (1).
21 - 1076
AUTOMATIC TRANSMISSION - 48RE - SERVICE INFORMATION
DR/DH
OVERDRIVE PISTON
1. Remove overdrive piston thrust plate (2). Retain
thrust plate. It is a select fit part and may possibly
be reused.
2. Remove intermediate shaft spacer (2). Retain
spacer. It is a select fit part and may possibly be
reused.
3. Remove overdrive piston (2) from retainer (1).
DR/DH
AUTOMATIC TRANSMISSION - 48RE - SERVICE INFORMATION
21 - 1077
OVERDRIVE CLUTCH PACK
1. Remove overdrive clutch pack wire retaining ring
(1).
2. Remove overdrive clutch pack (1).
3. Note position of clutch pack components for
assembly reference (1-4).
21 - 1078
AUTOMATIC TRANSMISSION - 48RE - SERVICE INFORMATION
DR/DH
OVERDRIVE GEARTRAIN
1. Remove overdrive clutch wave spring (1), 5 disc
clutch only.
2. Remove overdrive clutch reaction snap-ring (1).
Note that snap-ring is located in same groove as
wave spring.
3. Remove Torx™ head screws (1) attach access
cover and gasket to overdrive case.
4. Remove access cover and gasket (1).
DR/DH
AUTOMATIC TRANSMISSION - 48RE - SERVICE INFORMATION
21 - 1079
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст