Dodge Ram Truck 1500-2500-3500. Manual — part 82
HANDLE C-4171
PULLER C-452
REMOVER C-4660-A
SPREADER W-129-B
INSTALLER 5063
INSTALLER 6448
HOLDER 6719A
3 - 160
FRONT AXLE - C205F
DR/DH
ADAPTER KIT 6987B
DUMMY SHIM 8107
ADAPTER PLATES 8142A
PINION BLOCK 8177
REMOVER 8240A
DUMMY BEARING 8398
REMOVER 8401
INSTALLER 8692
DR/DH
FRONT AXLE - C205F
3 - 161
INSTALLER 8693
INSTALLER 8694
INSTALLER 8695
REMOVER 8831
3 - 162
FRONT AXLE - C205F
DR/DH
SHAFT-AXLE
REMOVAL
1. Remove half shaft from vehicle.
2. Remove skid plate, if equipped.
3. Clean axle seal area.
4. Remove snap ring (1) from the axle shaft.
5. Remove axle with Remove 8420A (2) (3) Collar
8420-3 (4) and Slide Hammer C-3752.
INSTALLATION
1. Lubricate bearing bore and seal lip with gear lubricant.
2. Install axle shaft and push firmly on axle to engage snap-ring.
3. Check differential fluid level and add fluid if necessary.
4. Install half shaft.
5. Install skid plate, if necessary.
SEAL-AXLE SHAFT
REMOVAL
1. Remove half shaft from vehicle.
2. Remove skid plate, if equipped.
3. Clean axle seal area.
4. Remove axle shaft O-ring.
5. Remove axle shaft.
6. Remove axle shaft seal with a small pry bar.
DR/DH
FRONT AXLE - C205F
3 - 163
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст