Dodge Ram Truck 1500-2500-3500. Manual — part 1382
SYSTEM-AIR INTAKE
DESCRIPTION
Air deflectors mounted to the hood and front grill route
the cool incoming air into the right inner fender (3)
where the inlet for the air cleaner housing (4) resides.
Air passes through a filter element inside the housing,
through a air inlet duct (1), and into the throttle body.
ELEMENT-AIR CLEANER
REMOVAL
1. Unclip the air cleaner cove (1) and release the top
of the air cleaner housing assembly.
9 - 2450
ENGINE - 8.3L - SERVICE INFORMATION
DR/DH
2. Pull the air filter element up and out of the air
cleaner housing assembly.
INSTALLATION
1. Install the air filter element (2) into the housing
assembly (3).
DR/DH
ENGINE - 8.3L - SERVICE INFORMATION
9 - 2451
2. Position the alignment tabs (3) of the housing
cover (1) into the lower housing assuring the posi-
tion of the interlocking tabs.
3. Clip and snap the air cleaner housing cover retain-
ers (2).
HOUSING-AIR CLEANER
REMOVAL
1. Disconnect the air inlet duct (1) and crankcase
ventilation hose from the air cleaner housing (2).
9 - 2452
ENGINE - 8.3L - SERVICE INFORMATION
DR/DH
2. Remove the air cleaner housing fastener (6) on the
front core support.
3. Lift up and remove the housing off of the guide
pins (2) and grommets.
INSTALLATION
1. Position the housing (3) over the guide pins (2) and
push down to seat.
2. Install and tighten the housing fasteners (6).
DR/DH
ENGINE - 8.3L - SERVICE INFORMATION
9 - 2453
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст