Dodge Ram Truck 1500-2500-3500. Manual — part 1440

5. Install the screws (1 & 2) into the wheel well.

6. Install the screws (1) into the belly pan.

13 - 10

FRAME & BUMPERS

DR/DH

FASCIA-REAR SRT-10

REMOVAL

1. Remove the screws (2 and 4).

2. Separate end cap (3) and lift off of the support brackets (1).

DR/DH

FRAME & BUMPERS

13 - 11

3. Remove the license plate lamp clips (2).

4. Remove the license plate lamps (4) and disconnect the electrical connectors.

5. Remove the push pin fasteners (3) and remove the fascia.

13 - 12

FRAME & BUMPERS

DR/DH

INSTALLATION

1. Install the fascia (5) and install the push pin fasteners (3).

2. Connect the electrical connectors and install the license plate lamps (4).

3. Install the lamp clips (2).

DR/DH

FRAME & BUMPERS

13 - 13